Operation Guide 5510
E-9
To set the digital time and date
1. In the Timekeeping Mode, hold down
A
until the
seconds start to flash, which indicates the setting
screen.
2. Press
C
to move the flashing in the sequence shown
below to select other settings.
Seconds
Day
DST Hour
Month
Minutes
Year
Seconds
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date. This watch features separate digital and
analog timekeeping. The procedures for setting the digital
time (page E-9) and analog time (page E-13) are different.
Setting the Digital Time and Date
Use the Timekeeping Mode to set and view a digital
display of the current time and date. When setting the
digital time, you also can configure settings for the
summer time (Daylight Saving Time or DST).
PM indicator
Minutes
Seconds
Month – Day
Day of week
Hours
E-7
Recall Mode
Dual Time Mode
Countdown Timer
Mode
Alarm Mode
C
C
C
E-6
General Guide
• Press
C
to change from mode to mode.
• In any mode (except when a setting screen is on the display), press
B
to illuminate
the face of the watch.
Stopwatch Mode
C
C
Hand Setting Mode
Timekeeping Mode
C
C
E-5
Illumination ……………………………………………………………………………E-41
To illuminate the display manually ……………………………………………E-41
To specify the illumination duration……………………………………………E-42
To turn the auto light switch on and off ………………………………………E-44
Reference ………………………………………………………………………………E-45
To turn the button operation tone on and off …………………………………E-46
Specifications …………………………………………………………………………E-51
E-4
Recall Mode ……………………………………………………………………………E-24
To recall stopwatch time records………………………………………………E-25
To delete a log …………………………………………………………………E-27
Countdown Timer………………………………………………………………………E-28
To use the countdown timer ……………………………………………………E-29
To configure countdown start time and auto-repeat settings ………………E-30
Alarms ……………………………………………………………………………………E-32
To set an alarm time ……………………………………………………………E-34
To test the alarm ………………………………………………………………E-36
To select the operation of Alarm
……………………………………………E-37
To turn Alarms
and on and off ……………………………………………E-38
To turn the hourly time signal on and off ……………………………………E-38
Dual Time ………………………………………………………………………………E-39
To set the Dual Time ……………………………………………………………E-39
E-3
Contents
General Guide ………………………………………………………………………… E-6
Timekeeping …………………………………………………………………………… E-8
To set the digital time and date ……………………………………………… E-9
To toggle between 12-hour and 24-hour timekeeping ………………………E-11
To toggle the Timekeeping Mode digital time between DST and
Standard Time ………………………………………………………………E-12
To adjust the analog time ………………………………………………………E-13
Stopwatch ………………………………………………………………………………E-15
To measure elapsed time ………………………………………………………E-18
To measure elapsed time with lap times ……………………………………E-19
To measure elapsed time with split times ……………………………………E-20
E-2
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-1
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
MO1612-EA
© 2016 CASIO COMPUTER CO., LTD.
To Next Page
Need help?
General
