To Next PageTo Next Page
Need help?Do you have a question about the Casio 5537 and is the answer not in the manual?
General| Model Number | 5537 |
|---|---|
| Brand | Casio |
| Water Resistance | 50 meters |
| Alarm | Yes |
| Stopwatch | Yes |
| Calendar | Yes |
| Display Type | Digital |
| Backlight | LED |
Displays and indicators on the watch face for various functions and modes.
How to cycle through different watch modes using button presses.
Step-by-step guide to establish a Bluetooth connection between the watch and a phone.
How to toggle displayed information in the Timekeeping Mode.
How to view the currently selected Home City name on the display.
How to shift analog hands for better display visibility and return them to normal.
Explains how the watch charges via solar power and its integrated panel.
Instructions on how to expose the watch face to light for charging.
How to determine the current battery charge level using the mode hand.
Describes watch behavior and function loss with low or dead battery.
Table showing approximate charging times based on light exposure.
Steps to install the app, configure Bluetooth, and pair the watch with a phone.
Instructions for downloading and installing the EDIFICE Connected app.
Steps to enable Bluetooth on your phone for connection.
Detailed process to establish a connection between watch and phone.
How to select FASTEST, TARGET, or LAST for stopwatch target time comparison.
How to perform stopwatch measurements with a set target time.
How to view stopwatch measurement data stored on the watch.
Procedure to transfer lap times and other data from watch to phone.
How to use EDIFICE Connected to view sent lap time data.
How to enable or disable the beep alert when lap time matches target time.
Steps to configure alarm times and settings using the app.
How to select a city for World Time display via EDIFICE Connected.
How to set World Time cities and auto summer time switching.
How to set summer time to Auto, ON, or OFF for a selected city.
How to exchange the designated Home Time and World Time cities.
How to correct the alignment of analog hands using the app.
How to trigger a tone on the phone to locate it.
How to adjust timer start time and other settings via the app.
How to adjust the summer time setting for the Home City via the app.
How to use EDIFICE Connected to check the watch's current charge level.
Detailed steps to establish a Bluetooth connection with a paired phone.
How to disconnect the watch from a phone connection.
Steps to remove pairing information between watch and phone.
How to disable auto time adjustment for use in restricted areas.
What to do when connecting to a new phone.
Overview of stopwatch capabilities including elapsed time and lap times.
How to view recorded lap times and measurement data.
How to start, stop, resume, and reset the stopwatch for elapsed time.
How to record lap times during an elapsed time measurement.
How to measure time against a preset target time.
How to select FASTEST, TARGET, or LAST for stopwatch target time.
How to read the second hand to understand lap time differences from the target.
A guide to measuring lap times during a race event.
How to configure the watch to beep when a lap time matches the target.
How to access and view recorded lap times from memory.
Explanation of what lap times represent and how they are recorded.
How the timer counts down and the beeper function.
How to set the initial countdown time for the timer.
How to start, pause, resume, and stop the timer function.
Detailed steps to set alarm times, types (Daily, 1 Time, Schedule), and duration.
How to configure alarms for specific dates or recurring events.
How to turn alarms and the hourly time signal on or off.
How to silence an alarm when it sounds.
How to determine if an alarm or hourly signal is enabled based on display indicators.
Introduction to the World Time function and its capabilities.
How to view the current time in selected World Time cities.
Procedure to select a city for World Time display.
How to manage summer time settings (Auto, ON, OFF) for selected cities.
How to exchange the designated Home Time and World Time cities.
How to select a city to serve as the watch's Home City.
How to manually adjust the watch's time and date without phone connection.
How to toggle between 12-hour and 24-hour time displays.
How to select the preferred format for displaying the date (e.g., YYYY.M.DD).
How to choose the language for displaying the day of the week.
How to turn on the watch's LED light manually.
How the watch automatically illuminates when tilted in the dark.
Steps to enable or disable the Auto Light feature.
How to choose between 1.5 or 3 seconds for the LED light duration.
How to correct the alignment of analog hands (second, mode, hour/minute).
How to enable or disable the audible tone when pressing buttons.
How to enable or disable the power saving function to conserve battery.
How to restore all watch settings to their original factory defaults.
Procedure to change watch settings for a new destination time zone.
Introduction to non-operational information like City Table and precautions.
Table showing summer time start and end dates for various cities.
Information on compatible phone models for watch connectivity.
Technical details and capabilities of the watch.
Important notes and warnings when using the watch with a mobile phone.
Legal compliance and restrictions for using the watch in specific environments.
How to disable radio wave transmission when needed.
How to turn off automatic time synchronization with the phone.
Details on trademarks and registered copyrights related to the watch and software.
Solutions for issues establishing an initial connection between watch and phone.
Solutions for problems reconnecting the watch after a disconnection.
Common issues and solutions for phone-watch connection problems.
Steps for pairing the watch with a different mobile phone.
Explains why auto time adjustment may not occur and how to resolve it.
Solutions for when the watch alarm does not sound.
