Casio 5713 User Manual

Note
●
Increasing or decreasing the number
of modes may change mode functions
and/or settings.
●
Even if you remove the Barometer
Mode, you can still display the
barometric pressure graph on the
Timekeeping Mode screen.
●
To initialize Mode Customization
Important!
●
Initializing Mode Customization also
initializes watch settings.
Note
●
Mode Customization cannot be
initialized while Mission Log is
enabled.
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
X
Loosen the crown and then pull it out.
The currently selected Home City will
appear on the display.
Crown
Home City
3.
X
Hold down (A) for at least seven
seconds. Release the button when
[CLEAR] stops flashing.
This initializes Mode Customization.
4.
X
Push the crown back in and then lock it.
Recording Your Current
Location (Location Memory)
You can use CASIO WATCHES to record
current location information.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Enter the Compass Mode.
l
Navigating Between Modes
3.
X
Hold down (C) for at least five seconds.
Release the button when [MEMORY]
starts to flash, and the second hand points
to .
When a location information receive
operation is successful while the watch is
connected with a phone, [MEMORY] will
change to [OK].
●
[ERR] will appear on the display if
connection fails for some reason.
●
[FAILED]
n
[POSITION] will appear in
sequence if location information
acquisition fails for some reason.
ConnectedTrying to connect
4.
Y
Perform the operation shown on the
phone screen to view the Location
Memory information record.
●
You can have only one location record
in memory. Saving location information
while there is already a location record
in memory will overwrite the existing
record with the new information.
Note
●
You can use the CASIO WATCHES
phone app to change the information
recorded in Location Memory to
something else.
●
If there is location information stored in
Location Memory, you can use
Location Indicator to check the
distance and bearing to the stored
location.
l
Checking the Distance and
Bearing to a Location Memory
Point (Location Indicator)
Checking the Distance and
Bearing to a Location
Memory Point (Location
Indicator)
The watch acquires current location
information from the phone, and then displays
the bearing and distance from your current
location to the location recorded in Location
Memory.
l
Recording Your Current Location (Location
Memory)
Bearing to memory point
Distance to memory point
Memory point
North indication
Important!
●
Note that CASIO WATCHES
operation is disabled while Location
Indicator is in use.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Enter the Compass Mode.
l
Navigating Between Modes
Watch Operation Guide 5713
17

Casio 5713 Specifications

General

Brand	Casio
Model	5713
Category	Watch
Language	English