Casio 5713 User Manual

Location Memory
Q1
Location Memory does not work.
Is the watch paired with a phone?
The watch needs to be paired with a
phone for Location Memory to work. Pair
the watch with a phone.
l
C
Pair the watch with a phone.
Are phone settings configured to acquire
location information?
The phone needs to be used to allow use
of CASIO WATCHES location information
for Location Memory to work. Allow use of
location information.
Are phone settings configured to acquire
GPS information?
You may experience problems acquiring
GPS information in environments like the
ones described below.
●
Where the view of the sky above is
narrow
●
Near trees or buildings
●
Near a train station, airport, or other
congested areas
●
Locations where there is heavy traffic
and radio wave interference
●
Near railway aerial wires, high-voltage
lines, TV towers, etc.
Signal reception is not possible in the
locations described below.
●
Where the sky is not visible
●
Underground, in a tunnel, under water
●
Indoors (Reception may be possible
near a window.)
●
Near radio communication equipment
or other devices that generate
electromagnetic waves
Q2
I want to change the recorded
location information.
You can use the CASIO WATCHES phone
app to edit location information.
l
Configuring Watch Settings
Location Indicator
Q1
Location Indicator does not appear
on the display.
Is the watch paired with a phone?
The watch needs to be paired with a
phone for Location Indicator to work. Pair
the watch with a phone.
l
C
Pair the watch with a phone.
Is Location Memory information being
recorded?
Location information needs to be
recorded in Location Memory for Location
Indicator to work. Record location
information in Location Memory.
l
Recording Your Current Location
(Location Memory)
Are phone settings configured to acquire
location information?
The phone needs to be used to allow use
of CASIO WATCHES location information
for Location Indicator to work. Allow use
of location information.
Are phone settings configured to acquire
GPS information?
You may experience problems acquiring
GPS information in environments like the
ones described below.
●
Where the view of the sky above is
narrow
●
Near trees or buildings
●
Near a train station, airport, or other
congested areas
●
Locations where there is heavy traffic
and radio wave interference
●
Near railway aerial wires, high-voltage
lines, TV towers, etc.
Signal reception is not possible in the
locations described below.
●
Where the sky is not visible
●
Underground, in a tunnel, under water
●
Indoors (Reception may be possible
near a window.)
●
Near radio communication equipment
or other devices that generate
electromagnetic waves
Barometric Pressure
Measurement
Q1
Following a relative barometric
pressure reading, the watch’s
function hand points to [0].
If a reading is outside the allowable barometric
pressure measurement range (260 hPa to
1,100 hPa (or 7.65 inHg to 32.45 inHg)), the
function hand will point to [0]. If [ERR] is
displayed, there may be a problem with the
sensor.
l
Checking the Change in Barometric
Pressure between Two Readings
Q2
[ERR] appears during measurement.
There may be a problem with the sensor. Try
taking another measurement. If [ERR] keeps
appearing after multiple measurement
attempts, contact a CASIO service center or
your original retailer.
Temperature Measurement
Q1
[ERR] appears during measurement.
There may be a problem with the sensor. Try
taking another measurement. If [ERR] keeps
appearing after multiple measurement
attempts, contact a CASIO service center or
your original retailer.
World Time
Q1
The time for a World Time City is not
correct.
The summer time setting (standard time/
summer time) may be wrong.
l
Specifying a World Time City
Watch Operation Guide 5713
56

Casio 5713 Specifications

General

Brand	Casio
Model	5713
Category	Watch
Language	English