Casio AMW-703D-1AV - User Manual

Operation Guide 4732 4733
1
MO0605-EA
Warning!
• The measurement functions built into this watch are not intended for use in taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonably accurate representations only.
• When fishing, always take proper precautions to ensure your own personal safety
and the personal safety of others around you.
• The fishing level indicator and moon phase indicator produced by this watch are
all based on calculations that use the watch’s current time, date, and Home Site
settings. Because of this, you should make sure that the current date and time,
and your Home Site data are all correct before using the indicators.
• See the “Timekeeping” section of this manual for information about setting the
current time and date, and about specifying your Home Site.
• Note that the fishing level indicator and moon phase indicator are all based on
calculated values. They are provided only for reference purposes.
• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
claims by third parties that may arise through the use of this watch.
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
• Depending on the model of your watch, display text
appears either as dark figures on a light background
(Module 4732), or light figures on a dark background
(Module 4733). All sample displays in this manual are
shown using dark figures on a light background.
• Button operations are indicated using the letters shown
in the illustration.
• For the sake of simplicity, the sample displays in this
manual do not show the analog hands of the watch.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
Module 4732
Module 4733
(Light)
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Temperature Data
Recall Mode
Stopwatch Mode
World Time Mode
Fishing Mode
▲
▲
▲
Countdown Timer
Mode
▲
▲
Alarm Mode
Press C.
▲
Hand Setting Mode
Timekeeping Mode
▲
▲
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
This watch features separate digital and analog timekeeping. The procedures for
setting the digital time and analog time are different.
• In the Timekeeping Mode, press A to toggle between the thermometer screen and
the temperature tendency screen.
•
The fishing level indicator indicates the times when fish can be expected to be feeding.
For more information, see
“ Fishing Mode ”.
Temperature Tendency
Screen
Temperature
tendency
graph
Day of
week –
Day
PM
indicator
Hour : Minutes
Moon phase
indicator
Fishing level
indicator
Press A.
▲
▲
Thermometer Screen
Temperature
Seconds
• The Moon phase indicator shows the current Moon phase in accordance with the
current date as kept in the Timekeeping Mode.
• See “Thermometer” for details about the thermometer screen and temperature
tendency graph.
Important!
• Be sure to configure the current time and date, and your Home Site data (data for
the site where you use the watch) correctly before using the functions of this watch.
See “Home Site Data” for more information.
Setting the Digital Time and Date
This watch is preset with UTC differential values that represent each time zone around
the globe. Before setting the digital time, be sure to first set the UTC differential for
your Home Site, which is the location where you normally will be using the watch.
• Note that World Time Mode times are all displayed based on the time and date
settings you configure in the Timekeeping Mode.
To set the digital time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
• Be sure to configure the correct UTC differential for
your Home Site before configuring any other
Timekeeping Mode settings.
• See the “UTC Differential/City Code List” for
information about the UTC differential settings that are
supported.
2. Press C to move the flashing in the sequence shown
below to select the setting you want.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Seconds
Hour
UTC
Differential
Minutes
Year
DST
Day
Month
Seconds
Temperature
Unit
12/24-Hour
Format
Temperature Sensor
Calibration
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen:
To do this:
Reset the seconds to 00
Toggle between Daylight Saving
Time (ON) and Standard Time (OF)
Specify the UTC differential
Change the hour or minutes
Toggle between 12-hour (12H) and
24-hour (24H) timekeeping
Do this:
Press D.
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
Press D.
Use D (+) and B (–).
Change the year, month, or day
• The UTC differential setting range is –12.0 to +14.0 in 0.5-hour units for Standard
Time (DST turned off), and –11.0 to +15.0 in 0.5-hour units for summer time (DST
turned on).
• For information about settings other than the time and date, see the following.
Temperature Sensor Calibration: “Thermometer”
Temperature Unit: “To specify the temperature display unit”
4. Press A twice to exit the setting screen.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
• Any time the seconds setting is changed, the analog hands are adjusted accordingly.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
1.In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (OF displayed).
4. Press A twice to exit the setting screen.
•
The DST indicator appears on the Timekeeping, Fishing,
Alarm, and Hand Setting Mode screens to indicate that
Daylight Saving Time is turned on. In the case of the
Fishing Mode, the DST indicator appears on the fishing
level screen only.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
On/Off status

Summary

Getting Acquainted and General Guide

General Guide Overview

Explains mode switching and basic button functions like illumination.

Timekeeping Mode Introduction

Introduces Timekeeping Mode features: thermometer, fishing, moon phase.

Setting Digital Time and Date

Procedure to set the current digital time and date accurately.

Daylight Saving Time (DST) Setting

How to toggle between DST and standard time.

Home Site Data Configuration

Configure Home Site Data

Essential setup for accurate regional features like fishing and moon phase.

Set Analog Time

Procedure to synchronize analog hands with digital time.

Fishing Mode Features

Fishing Level and Moon Data Display

Shows fishing suitability and current moon cycle information.

Specify Date for Fishing;Moon Data

Allows viewing fishing suitability and moon data for a specific date.

Thermometer and Temperature Data

Temperature Tendency Graph

Tracks and displays temperature changes over the past 17 hours.

Recall Temperature Records

Accesses stored temperature history data in memory.

Stopwatch and Countdown Timer

Stopwatch Measurement Operations

Details on measuring elapsed, split, and two-finish times.

Countdown Timer Configuration

Sets countdown start time and enables auto-repeat functionality.

Using the Countdown Timer

Explains how to start, stop, and utilize the countdown timer.

Alarm and World Time Modes

Setting Alarm Time and Hourly Signal

Procedure to configure alarm time and hourly chime.

Alarm Operation and Testing

How alarms sound, how to stop them, and how to test the alarm.

Toggling Alarm and Hourly Signal

Manages the activation status of the alarm and hourly time signal.

Viewing World Time City Data

Procedure to check the current time in different global cities.

Illumination and Reference Features

Manual Illumination Activation

How to manually activate the EL backlight for visibility.

Auto Light Switch Functionality

Details on automatic backlight activation based on wrist angle.

Temperature Sensor Calibration

Procedure to adjust temperature readings for accuracy.

Button Operation Tone Control

How to enable or disable the audible tone for button presses.

Precautions and Reference Data

Illumination Usage Precautions

Important warnings regarding illumination use and battery consumption.

Auto Light Switch Precautions

Warnings related to the auto light switch feature and its operation.

UTC Differential and City Code List

Reference table for UTC differentials and city time zones.

Casio AMW-703D-1AV Specifications

General

Brand	Casio
Model	AMW-703D-1AV
Category	Watch
Type	Analog-Digital
Style	Sport
Case Material	Stainless Steel
Band Material	Stainless Steel
Band Color	Silver
Dial Color	Black
Movement	Quartz
Crystal	Mineral
Calendar	Yes
Alarm	Yes
Stopwatch	Yes
Illuminator	LED light
Weight	150 g
Water Resistance	100 meters
Features	Stopwatch, Alarm