Casio AP-200

40
24 DSP Parameter Table
The lists in this section show the parameters of each DSP algorithm.
24.1 Algorithm 0001 : Mono-Mono Tremolo Parameter
24.2 Algorithm 0002 : Mono-Mono 3Band EQ Parameter
Note 1: See "25.9 Equalizer Mid Frequency Setting Value Table".
Note 2: See "25.12 DSP Equalizer Gain Setting Value Table".
24.3 Algorithm 0011 : Mono-Mono Wide 3Band EQ Parameter
Note 1: See "25.10 Wide Band Equalizer Mid Frequency Value Setting Table".
Note 2: See "25.12 DSP Equalizer Gain Setting Value Table".
24.4 Algorithm 2001 : Stereo-Stereo 3Band EQ Parameter
Same as "24.2 Algorithm 0002 : Mono-Mono 3Band EQ Parameter".
24.5 Algorithm 2017 : Stereo-Stereo Wide 3Band EQ Parameter
Same as "24.3 Algorithm 0011 : Mono-Mono Wide 3Band EQ Parameter".
24.6 Algorithm 2018 : Mix-Stereo Wide 3Band EQ Parameter
Same as "24.3 Algorithm 0011 : Mono-Mono Wide 3Band EQ Parameter".
Parameter Number Parameter Name Value Notes
Parameter7[00] Rate 00～7F
Parameter7[01] Depth 00～7F
Parameter Number Parameter Name Value Notes
Parameter7[00] Low Freq 00 - 07 Note1
Parameter7[01] Low Gain 34 - 4C Note2
Parameter7[02] Mid Freq 00 - 07 Note1
Parameter7[03] Mid Gain 34 - 4C Note2
Parameter7[04] High Freq 00 - 07 Note1
Parameter7[05] High Gain 34 - 4C Note2
Parameter Number Parameter Name Value Notes
Parameter7[00] Low Freq 00～0F Note1
Parameter7[01] Low Gain 34～4C Note2
Parameter7[02] Mid Freq 00～0F Note1
Parameter7[03] Mid Gain 34～4C Note2
Parameter7[04] High Freq 00～0F Note1
Parameter7[05] High Gain 34～4C Note2