Casio AP-220 - Page 46

To Previous Page

CASIO COMPUTER CO.,LTD.

6-2, Hon-machi 1-chome

Shibuya-ku, Tokyo 151-8543, Japan

MA0910-A

Main Page

Default Chapter1
- Table of Contents1
Part I5
- Sound Generator Section5
- System Section5
1 Product Configuration as a MIDI Device5
2 Conditions that Disable Message Send and Receive7
- Performance Controller Section7
  - MIDI Send by Auto Performance7
3 Timbre Type Specific Operation7
Channel Message8
4 Send Channel8
5 Receive Channel8
6 Note off8
Part II8
7 Note on9
8 Polyphonic Key Pressure9
9 Control Change9
- Bank Select (00H)10
- Modulation (01H)10
- Portamento Time (05H)10
- Data Entry (06H, 26H)11
- Volume (07H)11
- Pan (0AH)11
- Expression (0BH)12
- General Use Controllers 1 through 8 (10H through 13H, 50H through 53H)12
- Hold1 (40H)13
- Portamento Switch (41H)13
- Sostenuto (42H)14
- Soft (43H)14
- Vibrato Rate (4CH)14
- Vibrato Depth (4DH)15
- Vibrato Delay (4EH)15
- Portamento Control (54H)15
- Reverb Send (5BH)16
- Chorus Send (5DH)16
- Nrpn (62H, 63H)16
  - Assignable Functions to NRPN16
- Rpn (64H, 65H)17
  - Pitch Bend Sensitivity17
  - Fine Tune17
  - Coarse Tune17
  - Modulation Depth18
  - Null18
- All Sound off (78H)18
- Reset All Controllers (79H)18
10 Mode Messages19
- All Notes off (7BH)19
- Omni off (7CH)19
- Omni on (7DH)19
- Mono (7EH)20
- Poly (7FH)20
11 Program Change20
- About Timbre Type21
- DSP Assignments During Tone Selection21
12 Channel Aftertouch22
13 Pitch Bend Change22
- System Messages23
14 Active Sensing23
15 System Exclusive Message23
- Universal Realtime System Exclusive Message23
- Instrument-Specific System Exclusive Messages27
Instrument-Specific System Exclusive Messages28
16 Format28
- Message Classifications28
- Basic Message Structure28
- Field Formats29
17 Parameter Transfer33
- Two-Way Communication33
  - Example : Data Send in Response to Send Request to the Instrument33
- One-Way Communication33
  - Example : Data Send to Instrument from External Source33
  - Example : Data Send Resulting from Instrument Operation33
Parameter List34
18 System Parameters34
- System Information Parameter34
19 Setup Parameter34
- MIDI Parameter34
20 Patch Parameters35
- Master Tune Parameters35
- Master Mixer Parameters35
- System Chorus Parameter35
- System Reverb Parameters36
- System Acoustic Resonance Parameters36
- Brilliance Parameters36
- Part Parameters37
21 Tone Parameters37
- Basic Parameters37
- LFO Parameters38
- DSP Parameters39
- Scale Tune39
22 Music Library Parameters39
DSP Parameter List40
23 Tone with DSP List40
24 DSP Algorithm ID Tables40
- Monaural Tone DSP40
- Stereo Tone DSP40
25 DSP Parameter Set Types40
- Tremolo/Auto Pan40
- Wide 3Band EQ41
Part VII Setting Values and Send/Receive Values42
26 Setting Value Tables42
- Off/On Setting Value Table42
- 64 - 0 - +63 Setting Value Table42
- Pan Setting Value Table42
- 100 - 0 - +99 Setting Value Table42
- Reverb Type Setting Value Table42
- Chorus Type Setting Value Table42
- Wide Band Equalizer MID Frequency Setting Value Table43
- Brilliance Gain Setting Value Table43
- DSP Equalizer Gain Setting Value Table44
Part VIII MIDI Implementation Notation45
27 Value Notation45
- Hexadecimal Notation45
- Binary Notation45

Casio AP-220 - Page 46

Table of Contents

Related product manuals