Casio Casiotone 1000P User Manual

The basic operating sequence is as follows.
I — ( T Reparation) ........... ..................................... ........... .................
Press the PROGRAM/PRESET Button to set the digital display to
a sound programming display.
n
u
_i
f — (2 Memory Number Designation)-
Press the Sound Selection Button to select the desired memory
number from 0 to 9.
n
u
■ — ( 3 FEE T Designation)---------------------
If the FEET Button is pressed, the number in the feet position
(first digit) will blink. Press the Sound Selection Button which
corresponds to the desired feet.
— (4 ENVELOPE Designation) ^
If the ENVELOPE Button is pressed, the number in the envelope
position (second digit) will blink. Press the Sound Selection Button
which
corresponds to the desired envelope.
(5 MODULATION Designation)-
♦
If the MODULATION Button is pressed, the number in the modula 
tion position (third digit) will blink. Press the Sound Selection
Button which corresponds to the desired modulation.
— ( 6 Prog ramming Completion)-
. .. ....
When the MODULATION Button is pressed, the digital display
will return to a sound programming display and programming is
complete.
1 -It D
m ___ 1
1 n r Zi
J L -I
~ -- — —3027
j oa
_( uzj )
n _ r
u -I
The sequence of Step 3 through 5 above may be changed. In this case, at Step 6, press
the button (FEET, ENVELOPE or MODULATION) corresponding to the position
that is blinking.
EX.) When the number in the middle (envelope) is blinking, if the ENVELOPE
Button is pressed, the digital display will return to the sound programming
display.

Casio Casiotone 1000P Specifications

General

Brand	Casio
Model	Casiotone 1000P
Category	Synthesizer
Language	English