Casio Casiotone 1000P User Manual

( E xperiment with s ome effects. )
There are four effect buttons as shown on the right. Each time
the buttons are pressed they turn on and off. When they are on,
the respective indicators will light up.
• VIBRATO
This is a normal vibrato effect.
VIBRATO
DELAYED HEAVY SUSTAIN
viohmiu V1BRATQ VIBRATO
• DELAYED VIBRATO
This is a delayed vibrato effect.
• HEAVY VIBRATO
This gives a heavy vibration to the sound.
• Only one vibrato effect may be selected at one time.
• SUSTAIN
A lingering sound remains even after the fingers are removed from the keyboard.
( How to split the keyboard, )
If the SPLIT Button is pressed, the 61 -key, 5-octave keyboard
will be split into a 3-octave upper keyboard and a 2-octave
lower keyboard, each one adopting 4-note polyphonic. At
this time, the lower keyboard note range will raise one octave
and become a note range suitable for accompaniment.
A
B
C D E
Lower keyboard (4-note polyphonic) Upper keyboard (4-note polyphonic)
* Since the note range of A and B is raised one octave, B
becomes in the same note range as C.
LOWER
TONE SET - SPLIT
Lower Keyboard Volume Adjustment
The volume of the lower keyboard (lower two octaves) can be
independently adjusted. This is done by using the LOWER
VOLUME Control Knob. Turning the knob to the right in 
creases the volume. However, if the Main Volume Control
Knob is set to MIN, even if the LOWER VOLUME Control
Knob is set to MAX, no sound will be produced.
Lower Keyboard Sound Selection
Different sounds can be independently set for the lower and
upper keyboards.
(1)
Press both the SPLIT Button and the TONE SET Button
on.
• 7 he SPL 11' and TONE SET indicators will light.
TONE SET
- SPLIT
7

Casio Casiotone 1000P Specifications

General

Brand	Casio
Model	Casiotone 1000P
Category	Synthesizer
Language	English