Casio Casiotone CT-S1000V - Page 105

Controlling the Sound of a Performance
EN-104
5. Press the button of the module whose parameters you want to change.
This displays the module parameter setting screen.
6. Use U and I to select the parameter you want to change.
7. Rotate the dial or use – and + to change the setting
8. Press BACK to return to the module selection screen.
9. To exit the setting operation, press BACK.
• Bypass is a special parameter. Enabling it stops the effect from being applied to the module.
■ To change knob functions while Active DSP is turned on
1. Press MENU.
This displays the menu screen.
2. Use U and I to select the 5 buttons menu that includes ACTV DSP.
1