Saving and Recalling Setups (Registration)
EN-177
Each press of the pedal cycles through the currently selected bank’s registrations (setups) in area
number sequence.
1.
Press REGISTRATION.
This displays the registration screen.
2.
Use I to select the 5 buttons menu that includes AUTO EXIT.
3.
Long-press AUTO EXIT.
This causes “SEQ” to appear on the display and makes the Pedal 1 function the registration
sequence function.
4.
Press Pedal 1.
This recalls the settings of the next area and displays the recalled bank number and area number.
• If the last area recalled from is Area 4, pressing Pedal 1 recalls the settings from Area 1.
5.
If you want to move back to the previous area for recall, long-press the Pedal 1.
This recalls the settings of the previous area and displays the recalled bank number and area
number.
• If the last area recalled from is Area 1, long-pressing Pedal 1 recalls the settings from Area 4.
• If you have not yet recalled a registration setup, the initial setup to be recalled is Bank 1 Area 1.
Using the Pedal to Recall the Settings Sequentially
(Registration Sequence)
B
To Next Page
Loading...
