Saving and Recalling a Setup (MY SETUP)
EN-144
Use the procedure below to enable MY SETUP power on recall, which causes MY SETUP settings to
be recalled whenever power is turned on.
1.
Press MENU.
This displays the menu screen.
2.
Press MY SETUP.
This displays the MY SETUP screen.
3.
Rotate the dial to select the setup number you want to recall at startup.
• If you rotated the dial, press BACK.
4.
Press AT PW-ON.
This specifies that the MY SETUP number you selected in step 3 of this procedure should be
recalled and applied when the Digital Keyboard is turned on.
5.
To cancel MY SETUP power on recall, select the currently set MY SETUP setup
number and then press AT PW-ON again.
6.
To exit the setting operation, press EXIT.
Enabling MY SETUP Power On Recall
To Next Page
Loading...
