Casio Casiotone CT-S1000V - Changing the Pitch in Octave Units (Octave Shift

Controlling the Sound of a Performance
EN-129
You can use the procedure below to raise or lower pitch in octave units.
You can use the procedure below to raise or lower the pitch of the UPPER part in octave units.
1. Press TONE.
This displays the tone screen.
2. Long-press LAYER.
This displays the octave shift screen, which shows setting items for the upper octave shift.
3. Rotate the dial to change the shift amount.
• You can specify a value in the range of –3 to +3 octaves.
• After you rotate the dial once to select a shift amount, you can change the shift amount further
using – and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
4. To exit the setting operation, press EXIT.
• You can also display the octave shift screen by pressing MENU and then OCT SHIFT.
• With the home custom function, you can display the upper octave shift –/+ buttons on the home
screen.
• For information about the Upper Part, see “Layering and Splitting Tones” (page EN-123).
Changing the Pitch in Octave Units (Octave Shift)
Shifting the Pitch of the UPPER Tone in Octave Units (Upper Octave Shift)