Controlling the Sound of a Performance
EN-113
5.
Rotate the dial to select the delay type.
Delay types are shown in the table below.
• After you rotate the dial once to select a delay type, you can change the selection further using
– and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
6.
To exit the setting operation, press EXIT.
• Selecting a delay type other than Tone increases the Delay Send the keyboard part.
• You can also use the knobs to adjust how delay is applied to a tone. For more information, see
“Using the Knobs to Change the Sound” (page EN-91).
Setting Type Display Name
Recommended Delay for Each Tone Tone
Short 1, 2 Short 1, 2
Echo Echo
Tempo Sync Short Tempo Sync Short
Tempo Sync Middle Tempo Sync Middle
Tempo Sync Long Tempo Sync Long
Ambiance Ambiance
Middle 1, 2 Middle 1, 2
Long 1, 2 Long 1, 2
Middle Pan Middle Pan
Long Pan 1 to 3 Long Pan 1 to 3
To Next Page
Loading...
