Saving and Recalling Setups (Registration)
EN-175
6.
Rotate the dial to the right or press ON.
This displays “On”, which indicates the displayed item is not recalled and applied to the setup.
• If an item’s status is currently FRZ ITEM ON (not recalled), you can change it back to FRZ ITEM
OFF (recalled) by rotating the dial to the left or by pressing OFF. This displays “Off” for the
setting.
7.
To disable freeze, return to the registration screen and then press FREEZE.
This causes “FRZ” to disappear from the display, indicating that freeze is disabled.
■ Freeze Item List
• Rhythm (Rhythm)
• Tempo (Tempo)
• Tone (Tone)
• Split Point (Split Point)
• Arpeggiator/Auto Harmonize (ARP/AH)
• Transpose (Transpose)
• Scale Tuning (Scale Tuning)
• Touch Response (Touch Response)
• Effect (Effect)
• Controller (Controller)
• Changing the tone resets some settings classified as controllers. If you want to freeze the controller
settings, also freeze the tone setting.
• Settings that can be frozen by turning on the effect of the freeze item are: Reverb Type, Chorus
Type, and Delay Type. If you want to freeze Reverb Send, Chorus Send, or Delay Send, also freeze
Controller and Tone.
To Next Page
Loading...
