Recording Your Keyboard Play
EN-194
1.
Press TONE or RHYTHM.
• To record as a tone recording, press and hold TONE to exit the rhythm function.
• If you are using the SONG function, exit the function.
2.
Rotate the dial to select a tone or rhythm.
3.
Press RECORD.
This displays “(REC)” and enters record standby.
4.
Long-press RECORD.
This displays a record settings screen.
5.
Press COUNT and then select a count operation.
Each press of COUNT changes the setting.
6.
To exit the setting operation, press BACK.
Sounding a Count While Recording
Setting
(Displayed Setting Name)
Description
Off Count does not sound.
Count (COUNT) Inserts one blank measure before recording starts, and sounds
a count.
Pre-count (PRECOUNT) Inserts one blank measure before recording starts, and sounds
a count for that measure only.
To Next Page
Loading...
