Playing Lyric Tones (Vocal Synthesis)
EN-54
By changing the lyric tone attack setting, you can adjust the timing when lyrics sound by uniformly
shortening the beginning of the sounding of the lyric tone.
1.
Press LYRICS.
The LYRICS LED of the TONE MODE SELECT buttons lights, and the lyric tone screen appears
on the display.
2.
Long-press KEY CTRL.
This displays the lyric tone setting screen.
3.
Press ATTACK.
This displays lyric attack setting items.
4.
Rotate the dial to adjust the timing of when lyrics sound.
This displays the –/+ screen.
• The setting range is 0 to 30.
• After you rotate the dial to select a setting, you can adjust it further using – and +.
• To go back to the previous screen, press BACK.
5.
To exit the setting operation, press BACK.
Specifying the Timing of Lyric Sounding (Lyric Tone Attack)
To Next Page
Loading...
