Controlling the Sound of a Performance
EN-88
5.
Rotate the dial to change the setting.
• You can specify a value from 0 to 127.
• After you rotate the dial once to select a setting, you can change the selection further using –
and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
6.
Press BACK to return to the portamento screen.
7.
To exit the setting operation, press EXIT.
• You can also display the portamento screen by pressing MENU and then PORTAMENTO.
• The part portamento time setting for a part whose instrument tone or vocalist has been changed will
be the recommended setting for that instrument tone or vocalist.
• For information about parts, see “Layering and Splitting Tones” (page EN-123).
To Next Page
Loading...
