Controlling the Sound of a Performance
EN-96
• Even if you change the function of a knob, the effect applied by the previous knob function remains in
effect. To apply the effects of multiple functions and return the effects to their initial default settings,
see “To reset the knob effect” (page EN-91).
• The effect of the following functions will be the recommended value of the tone when the tone of the
corresponding part is changed.
– Cutoff
– Resonance
– Attack Time
– Release Time
– Part Portamento Time
– Modulation Range
– Vibrato Rate
– Vibrato Depth
– Vibrato Delay
– Reverb Send
– Chorus Send
– Delay Send
To Next Page
Loading...
