CDP-130
– 19 –
<Installing the keys>
• Refer to the illustration below for the location of each white key.
• Be sure to install each key at its designated location.
• All black keys are the same. A black key may be installed at any correct black-key location.
A code is indicated at the foot of each key.
CEGBDFACEGBDFACEGBDFACEGB
SA
DB FACEGBDFACEGBDFACEGBDFA
SC
Install a black key before installing the white keys on either of its sides. Follow the same
procedures below to install a black or white key.
(1) Assemble a key to a hammer.
(2) Press the protrusion of the chassis fi rmly into the keyhole.
(3) Press the key to see if it moves properly.
Set securely into the chassis.
Assemble a key to a hammer.