Troubleshooting
In case of power failure...
TI
the power supply
lo
the
cash
register
is
cul
by a power
failure
or any
other
reason
simply
wail
lor
power
u>
be
restored
The
details
of
any
on going
transaction
as
well
a.s
all
sales
data
in
memory
arc
protected
by
the
memory
backup
batteries
•
Pow
er
failure
during a
registration
The
subtotal
for items registered up to the power
failure
is
retained
in
memory You
will
be able to continue
w
ith
the registration
when
power
is
restored
•
Pow
er failure during printing or a
READ/RESET
report
The data already printed before the
pow
er failure
is
retained
in
memory so simply perform the
READ/RESET
operation after
pow
er
is
restored Note that a
pow
er failure
in
this
case increments the consecutive number
•
Pow
er failure during printing of a receipt and
journal
Printing
will
resume
alter
power
is
restored
A
line
that
was
being
pruned
when
the
power
lailurc
occurred
is
reprinted
in
lull
•
Other
The
power
lailurc
symbol
is
primed
and any
item
that
was
being
primed
when
the
power
lailurc
occurred
is
reprinted
in
lull
Jmportant! |
Once
receipt/journal
printing or printing of a report starts, it can be stopped only by interruption of
power to the cash register. Even if you set the mode switch to OFF while printing is being performed,
the printing operation continues until it is completed. This means that once RESET printing starts, it
will continue until printing of the report is completed and all sales data is cleared from memory.
[ About the low battery power indicator...
]
The
following shows
the
low
battery
indicator
TI
this
indicator appears when you
switch
the cash
register
on
it
can mean one
ol
three
things
• No
memory
backup
batteries
arc loaded
in
the
cash
register
•
The
power
of
the
ballcncs
loaded
in
the
unit
is
below a
certain
lc\cl
• The batteries loaded
in
the cash register are dead
To clear
this
sign
press the
|^£l
key
^Important!
Whenever the low battery power indicator appears on the display, load a set of three new batteries as
soon as possible. If there is a power failure or you unplug the cash register when one of the above three
conditions exists, you will lose all of your settings and sales data.
BE SURE TO KEEP THE POWER CORD OF THE CASH REGISTER
LUGGED IN WHENEVER YOU REPLACE THE BATTERIES.