To Next PageTo Next PageWhat to do if no sound from Casio Celviano AP-650M when pressing keys?
If you're not hearing any sound when pressing the keys on your Casio Musical Instrument, there are a couple of things to check: * First, make sure the VOLUME controller isn't set to “MIN”. Rotate it towards “MAX” to increase the volume. * Second, ensure that headphones or an adapter plug are not plugged into the PHONES jack. If something is plugged in, disconnect it.
Why does playback stop when transferring song data to my Casio Musical Instrument?
If playback stops during song data transfer from your computer to your Casio Musical Instrument, it could be due to digital noise interrupting the data communication. This noise might come from the USB cable or power cord. To resolve this: 1. Stop song playback. 2. Disconnect and then reconnect the USB cable from the Digital Piano. 3. Try playing back the song again. 4. If the problem persists, quit the MIDI software, disconnect and reconnect the USB cable, restart the software, and try playing the song again.
What to do if tones sound strange on Casio Musical Instrument?
If the tones or effects on your Casio Musical Instrument sound strange, and turning the power off and on doesn't fix it (for example, note intensity doesn't change with key pressure), the “Setting Backup” feature may be turned on. To resolve this, turn off “Setting Backup”, then turn the power off and back on again.
Why is the pitch off on my Casio Digital Piano?
If the pitch of your Casio Digital Piano is off, there are several potential causes: 1. The key setting might be something other than “440.0 Hz”. Change the key setting to “440.0 Hz”, or turn the Digital Piano off and then back on again. 2. The Digital Piano tuning might be incorrect. Adjust the Digital Piano tuning, or turn the Digital Piano off and then back on again. 3. A non-standard temperament setting might be in use. Change the temperament setting to “00:Equal”, which is the standard modern tuning. 4. Octave shift might be enabled. Change the octave shift setting to 0.
What to do if I cannot transfer data after connecting Casio Digital Piano to computer?
If you cannot transfer data after connecting your Casio Digital Piano to a computer: 1. Check that the USB cable is correctly connected to both the Digital Piano and the computer. Also, ensure that the correct device is selected in your computer’s music software. 2. Turn off the Digital Piano, then exit the music software on your computer. Turn the Digital Piano back on, and then restart the music software.
General| Brand | Casio |
|---|---|
| Model | Celviano AP-650M |
| Category | Musical Instrument |
| Language | English |
Procedure to reset the digital piano's stored data and settings to their initial factory defaults.
How to activate and play along with automatic accompaniment patterns using chords.
Guide to editing built-in rhythms to create and save custom user rhythms.
Guide to using the Music Preset editor to create and save custom user presets.
How to record keyboard performance into the digital piano's internal song memory.
Instructions for recording keyboard play as audio data directly to a USB flash drive.
Detailed instructions for assembling the piano stand, including parts and steps.
Common problems, their causes, and suggested solutions for the digital piano.
Technical details and features of the digital piano, including dimensions and power.
Important guidelines for safe and proper use, maintenance, and environmental considerations.
