To Next PageTo Next PageHow to fix no sound on my Casio CGP-700?
If your Casio Musical Instrument isn't producing sound when you press a key, here are a few things to check: * Make sure the VOLUME controller isn't set to “MIN”. Rotate it towards “MAX”. * Ensure nothing is plugged into the PHONES jack. * Verify the Upper 1 icon is on. Touch the Upper 1 icon to turn it on. * Confirm that the “Speaker” SYSTEM SETTING is on.
Why is the pitch off on my Casio Digital Piano?
If the pitch of your Casio Digital Piano is off, consider the following: 1. The Digital Piano tuning may be incorrect. Adjust the Digital Piano tuning, or try turning the Digital Piano off and then back on again. 2. The key setting might be something other than “440.0 Hz”. Change the key setting to “440.0 Hz”, or power cycle the Digital Piano. 3. A non-standard temperament setting could be in use. Change the temperament setting to “Equal”, which is the standard modern tuning. 4. Octave shift might be enabled. Change the octave shift setting to 0.
What to do if playback stops during song data transfer on Casio CGP-700 Musical Instrument?
If playback stops while transferring song data to your Casio Musical Instrument, it might be due to digital noise. Stop song playback, disconnect, and then reconnect the USB cable from the Digital Piano. If that doesn't work, quit the MIDI software, disconnect and reconnect the USB cable, restart the MIDI software, and try again.
Why do tones and effects sound strange on my Casio CGP-700 Musical Instrument?
If tones and effects sound strange on your Casio Musical Instrument, and restarting doesn't help, the “Auto Resume” feature might be turned on. Turn off “Auto Resume”, then turn the power off and back on again.
How to fix no sound when pressing keys on Casio CGP-700 Musical Instrument?
If no sound comes out when you press a key on your Casio Musical Instrument, here's what to check: 1. Make sure the VOLUME controller isn't set to “MIN”. Try rotating it towards “MAX”. 2. See if headphones or an adapter plug are plugged into the PHONES jack. If so, disconnect them. 3. Ensure the Upper 1 icon is on. Touch the icon to turn it on. 4. Verify that the “Speaker” SYSTEM SETTING is enabled.
What to do if Casio CGP-700 Musical Instrument tones sound strange?
If your Casio Musical Instrument's tones or effects sound strange, and restarting it doesn't help (for example, the note intensity doesn't change with key pressure), the “Auto Resume” feature might be the culprit. To resolve this, turn off the “Auto Resume” feature. Then, turn the power off and back on again.
Why is the pitch off on my Casio Musical Instrument?
If the pitch of your Casio Musical Instrument is off, it could be due to several reasons: 1. The instrument's tuning might be incorrect. Try adjusting the tuning or simply turning the instrument off and then back on. 2. The key setting might be set to something other than “440.0 Hz”. Change it to “440.0 Hz”, or try turning the power off and back on. 3. A non-standard temperament setting could be in use. Change the temperament setting to “Equal”, the standard modern tuning. 4. Octave shift might be enabled. Change the octave shift setting to 0.
What to do if playback stops during data transfer to Casio CGP-700 Musical Instrument?
If playback stops while transferring song data from your computer to your Casio Musical Instrument, digital noise from the USB cable or power cord may be interrupting the data communication. Here are some solutions: * Stop song playback, disconnect, and then reconnect the USB cable from the instrument. Try playing the song again. * If the problem persists, quit the MIDI software, disconnect, and then reconnect the USB cable. Restart the MIDI software and try playing the song again.
What to do if I cannot transfer data to my Casio CGP-700?
To solve the problem of not being able to transfer data after connecting your Casio Musical Instrument to a computer: 1. Check that the USB cable is correctly connected to both the instrument and the computer, and that the correct device is selected in your computer’s music software. 2. Turn off the instrument, then exit the music software. Turn the instrument back on, and then restart the music software.
General| Type | Digital Piano |
|---|---|
| Number of Keys | 88 |
| Touch Response | 3 sensitivity levels, Off |
| Sound Source | AiR Sound Source |
| Polyphony | 128 notes |
| Built-in Tones | 550 |
| Built-in Rhythms | 200 |
| Effects | Reverb, Chorus, Brilliance |
| Display | LCD |
| Connectivity | USB to Host, USB to Device |
