EN-27
English
Registering Tone and Rhythm Setups
Registration memory lets you store Digital Piano
setups (tone, rhythm, etc.) for instant recall whenever
you need them. Registration memory simplifies
performance of complex pieces that require successive
tone and rhythm changes.
You can have up to 96 setups in Registration memory
at one time. To select a setup, use the co BANK button
and REGISTRATION buttons cp through cs.
• Press the co BANK button and then use the bs w,
q buttons to change the bank number.
• Pressing a REGISTRATION button (cp through
cs) selects the corresponding area in the currently
selected bank.
• For details about these settings, see “Parameter List”
(page A-14).
1.
Configure the Digital Piano with the tone,
rhythm, and other settings you want to save.
2.
While holding down the ct STORE button,
perform the operation below.
Use the bs w, q buttons to select the bank where
you want to store the data, and then press a
REGISTRATION button (cp through cs) to specify an
area.
The data will be saved to the bank and area you specify.
Example: Bank 4, Area 1
cr csco cp cqbs ct
Area 1 Area 2 Area 3 Area 4
Bank 1 Setup 1-1 Setup 1-2 Setup 1-3 Setup 1-4
Bank 2 Setup 2-1 Setup 2-2 Setup 2-3 Setup 2-4
.
.
.
.
.
.
.
.
.
.
Bank 24 Setup 24-1 Setup 24-2 Setup 24-3 Setup 24-4
co cp cq cr cs
To save registration data
ctcp cq cr cs
Bank
Lit
CGP700-ES-1B.indd 29 2017/09/08 12:54:25
To Next Page
Loading...
Need help?
General
