EN-44
Configuring Digital Piano Settings
■ EFFECT Screen
Use this screen to apply variety of acoustic effects to notes.
■ MIDI RECORDER Screen
Use this screen to record a performance to Digital Piano memory and to play back recordings. For more
information, see “Recording to Digital Piano Memory (MIDI Recorder)” (page EN-31).
■ AUDIO RECORDER Screen
Use this screen to record a performance on a commercially available USB flash drive, and to play back recorded
audio data on the Digital Piano. For more information, see “Recording to a USB Flash Drive (Audio Recorder)”
(page EN-38).
■ MUSIC PRESET Screen
Music presets provide you with one-touch tone, rhythm, chord, and other settings that are optimized for specific
musical genres and songs. For more information, see “Music Presets” (page EN-26).
Item Description Setting
Brilliance Controls the brilliance of the tone. –3 to 0 to +3
Reverb Type Specifies the type of reverb to be
applied.
Room1, Room2, Room3, Hall1, Hall2, Hall3, Plate1, Plate2,
Plate3, Delay, Pan Delay, Large Room1, Large Room2,
Stadium1, Stadium2, Long Delay1, Long Delay2
Chorus Type Specifies the type of chorus to be
applied.
Chorus1, Chorus2, Chorus3, Chorus4, FB Chorus, Flanger1,
Flanger2, Flanger3, Flanger4, Short Delay1, Short Delay2,
Short Delay3, Short Delay4, Soft Chorus, Bright Chorus,
Deep Chorus
Delay Type Selects the delay type. Short 1, Short 2, Echo, Short Tempo, Mid Tempo, Long Tempo
Damper Noise Damper noise is a slight metallic
ringing sound that is generated as
the damper of an acoustic piano
separates from the wires when
the damper pedal is pressed. Use
this setting to enable or disable
damper noise.
Off, On
B
CGP700-ES-1B.indd 46 2017/09/08 12:54:26
To Next Page
Loading...
Need help?
General
