Controlling Sounds
EN-36
1.
Press dr OCTAVE.
Number of octaves shifted. 0 (zero) indicates no
shifting, 1 indicates one octave up, and –1 indicates
one octave down. You can specify a value in the
range of –3 to +3.
Keyboard part. For details about keyboard parts and
how they are indicated, see “Keyboard Part
Indicators” (page EN-19).
Indicates the octave shift setting screen.
2.
Use the [1] (V) and [3] (W) bm number keys
to select the keyboard part you want to octave
shift.
3.
Use bn [–] and [+] to octave shift the keyboard
part you selected in step 2.
4.
Repeat steps 2 and 3 to octave shift other parts
as required.
5.
To exit the procedure and return to the state
the Digital Keyboard was in before step 1 of
this procedure, press dr OCTAVE or the [4]
(EXIT) bm number key.
1.
While holding down dr OCTAVE, press the
ds TRANSPOSE [w] or [q] button.
• Pressing [w] shifts the specified keyboard parts one
octave down, while [q] shifts one octave up.
• Use the Quick Octave Shift keyboard part selection
procedure below to select the parts that are affected
by a Quick Octave Shift operation.
1.
Press dr OCTAVE.
This displays “U1 Oct.”
2.
Use the [1] (V) and [3] (W) bm number keys
to display “Btn Trgt”, and then press [6]
(ENTER).
This displays “U1OctBtn”.
3.
Use the [1] (V) and [3] (W) keys to display
the part whose setting you want to change.
4.
Use the bn [–] and [+] to switch between on
and off.
• Selecting on causes the keyboard part’s octave to be
shifted by the Quick Octave Shift operation under “To
use Quick Octave Shift” (page EN-36).
5.
Repeat steps 3 and 4 as required for other
parts.
6.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
To configure the octave shift amount setting
for each part
U1 Oc t .
U2 Oc t .
To use Quick Octave Shift
To select Quick Octave Shift keyboard parts
CTX5000_3000_EN.book 36 ページ ２０１８年２月２６日 月曜日 午後３時５６分
To Next Page
Loading...
