EN-49
Using Auto Accompaniment (Rhythm Mode)
1.
Press bk FUNCTION.
2.
Use the [1] (V) and [3] (W) bm number keys 
to display “ChordMod”.
3.
Use bn [–] and [+] or the bl dial to change the 
setting value.
• The table below shows the relationship between 
setting values and chord fingering modes.
• The accompaniment keyboard ranges for each chord 
fingering mode is shown in the illustration below. The 
split point (page EN-20) shown in the illustration is the 
initial default split point.
Y FULL RANGE CHORD
Y Not FULL RANGE CHORD
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the 
setting screen.
Specifying a split point (page EN-20) puts the LOWER part 
keyboard and the accompaniment keyboard in the same area. 
You can also specify different areas for each of these two 
keyboards. You can also configure a setting so the LOWER 
part tone does not sound in the area where the LOWER part 
keyboard and accompaniment keyboard overlap. For details, 
see the “Advanced Split Settings” (page EN-49).
Your Digital Keyboard can be split into three areas: an 
UPPER part keyboard, a LOWER part keyboard, and an 
accompaniment keyboard.
You can specify a split point (page EN-20) as shown in the 
illustration below.
You can specify a lower point and a chord point, to assign 
different areas as a LOWER part keyboard and an 
accompaniment keyboard.
● Lower Point
Specifying the lower limit of the UPPER part keyboard results 
in a configuration like the one shown below. The 
accompaniment keyboard range is not affected in this case.
To select a chord fingering mode
Setting 
value
Chord Fingering Modes Display
1 CASIO CHORD CASIO Cd
2 FINGERED 1 Fingerd1
3 FINGERED 2 Fingerd2
4 FINGERED ON BASS FgOnBass
5 FINGERED ASSIST FgAssist
6 FULL RANGE CHORD FulRange
UPPER part keyboard
Split Point
Accompaniment 
keyboard
Accompaniment Keyboard Range Setting
Advanced Split Settings
UPPER part keyboard
Split Point
LOWER part keyboard
UPPER part keyboard
Lower Point
LOWER part keyboard
Accompaniment 
keyboard
CT-X9000_8000IN_EN.book  49 ページ  2018年4月12日 木曜日 午後1時8分