Need help?Do you have a question about the Casio CTK-2300 and is the answer not in the manual?
General| Keys | 61 |
|---|---|
| Polyphony | 48 |
| Tones | 400 |
| Rhythms | 150 |
| Display | LCD |
| Dimensions | 946 x 307 x 92 mm |
| Weight | 3.4 kg |
| Touch Response | No |
| Sound Source | AHL |
| Auto Accompaniment | Yes |
| Built-in Songs | 110 |
| Lesson Function | Yes |
| Metronome | Yes |
| Sampling Function | Yes |
| Key Transpose | Yes |
| Speakers | 10 cm x 2 |
| Amp Output | 2W + 2W |
| Power Supply | AC adapter or 6 AA batteries |
| Digital Effects | Reverb (10 types) |
| Tuning Control | A4 = 415.5 to 465.9 Hz |
| Input/Output Terminals | Headphones/Output, USB |
| Included Accessories | Music stand |
Connect an AC adaptor to start the diagnostic procedure.
Press POWER, '0 Up', and 'START/STOP' buttons simultaneously.
Verify modes by pressing specific buttons: CASIO CHORD, FINGERED, NORMAL.
Test switches by pressing '0' and then buttons in sequence.
Verify ROM integrity by pressing '2'; an OK sound is expected.
Check ROM version by pressing '1'; an audible pip sound is expected.
Test audio output levels by pressing '4', '5', '6' for sine wave sounds.
To Next Page
