Casio CTK-4200 - Page 25

Category Transfer
ID (c) Parameter Set Individual Parameter One-way Bulk Handshake Bulk
00H System A - -
02H Patch A - -
03H Tone A A A
06H Drum A A A
0DH Instrument A A A
0EH Wave Parameter A A A
0FH Wave Data F A A
12H Scale Memory A A A
1FH All F A A
20H Song F A A
21H Sequence F A A
22H Registration F A A
23H Lesson Rec F A A
24H Rhythm F A A
A · · · Available (Also including when only some parameters are available.)
F · · · File Information (Not the data itself. Name, size, and other file information only.)
- · · · Not Available
19.3.7 mem : Memory Area ID
Format: 0mmmmmmmB
Specifies the memory area that is the object of the parameter transfer. The following are defined for
this Instrument.
mem Data Type Meaning
0 User area Read/write enabled
1 Preset area Read/write disabled
19.3.8 pset : Parameter Set Number
Format: LSB 0nnnnnnnB
MSB 0mmmmmmmB
This field is a 2-byte (LSB, MSB) value indicating the number of the parameter set (mmmmmmmnnnnnnnB,
Binary) being transferred.
19.3.9 blk Block Number
The block number is a supplementary number that specifies which block parameter is to be accessed
when there are multiple blocks (instrument parts, etc.) that include parameters with the same ID within
a single parameter set.
Format: LSB 0iiiiiiiB
0jjjjjjjB
MSB 0kkkkkkkB
25