Casio CTK-5200 User Manual

Sampling Sounds and Playing Them on the Digital Keyboard
E-20
3. Output sound from the external device.
Sampling will start automatically.
• Sampling will not start if the volume of the sound is too
low.
4. After the sound you want to sample is finished,
press
cr
and
cs
at the same time.
Sampling will stop.
• Even if you do not press
cr
and
cs
, sampling will stop
automatically whenever there is no more sound being
input from the external device. Sampling also will stop
automatically 10 seconds after it is started.
5. Play something on the Digital Keyboard.
• You may not be able to get 10 seconds of sampling if
Digital Keyboard memory is low due to storage of other
data. If this happens, deleting other memory data you no
longer need will free up memory space and you should be
able to sample for 10 seconds. See “Deleting a Sampled
Sound” on page E-25 for more information.
• Sampling sound and storing it will delete any sound
data currently stored under the same tone number. To
help ensure that you do not accidentally delete
important data, be sure to read “Protecting Against
Accidental Deletion of Sampled Sounds” on page E-26.
■ How sampled sounds are played
Pressing Middle C (C4) will play back the original sound. The
keys to the left and right of C4 play the sound at different
pitches.
You can use the following procedure to loop a sampled sound
so it continues to repeat, as you play on the Digital Keyboard.
1. Press
bo
(RHYTHM).
2. Press
cr
and
ct
at the same time.
This enters repeat standby.
3. Press the button (
bt
to
cn
) that corresponds to
the melody sampling tone number you want to
select.
This will start looped playback of the selected sound.
4. Press the same button again to stop playback.
5. Press
bs
to return to the screen that was
displayed before step 2 of this procedure.
Flashes
Sam
p
lin
g
S1 :Or
g
nl
Sampled sound 1
Used memory
(Unit: Kbytes)
Remaining
memory capacity
Looping a Sampled Sound
To select this tone number: Press this button:
601
bt
602
ck
603
cl
604
cm
605
cn
C4
S
y
n t h P o
p
Lights
CTK5200_e.book 20 ページ ２０１３年７月２３日 火曜日 午後５時４分

Casio CTK-5200 Specifications

General

MIDI-keyboard number of keys	61 keys
Metronome	Yes
Product color	Black
Sound effects	Chorus, Reverberation
Maximum polyphony (notes)	48
Music memory capacity (songs)	152
Display type	LCD
Interface	USB
Headphone outputs	1
Power source type	DC

Weight and Dimensions

Depth	350 mm
Width	948 mm
Height	103 mm
Weight	4400 g