Casio CTK-5200 User Manual

Sampling Sounds and Playing Them on the Digital Keyboard
E-22
You can use the procedure to change the drum sounds that
are assigned to each keyboard key.
• You can store up to three drum sets and store them as tone
numbers 606, 607, and 608. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.
1. Press
bo
(RHYTHM).
2. Press
bn
(TONE) and then use
br
(10-key) to
enter the tone number (606, 607, or 608) for the
drum set whose sounds you want to change.
3. Press
cr
and
cs
at the same time.
4. Press the keyboard key to which you want to
assign the drum sound you are about to
sample.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.
5. Output sound from the external device.
Sampling will start automatically.
• Sampling will not start if the volume of the sound is too
low.
Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)
No Da t a
Lights
No Da t a
Flashes
Flashes
W aitin
g
Flashes
Sam
p
lin
g
CTK5200_e.book 22 ページ ２０１３年７月２３日 火曜日 午後５時４分

Casio CTK-5200 Specifications

General

MIDI-keyboard number of keys	61 keys
Metronome	Yes
Product color	Black
Sound effects	Chorus, Reverberation
Maximum polyphony (notes)	48
Music memory capacity (songs)	152
Display type	LCD
Interface	USB
Headphone outputs	1
Power source type	DC

Weight and Dimensions

Depth	350 mm
Width	948 mm
Height	103 mm
Weight	4400 g