Casio CZ-1 User Manual

PlliCOMF^Ri@iE<i|ffil|
The
tone most
recently
created
using
the PARAMETER
SECTION
is
temporarily
stored
in
the
COMPARE/RECALL
area of the
PROGRAMMER
SECTION.
An independent
COMPARE/RECALL
area
capable
of holding a single tone
exists
in
the normal
mode.
The
moment
data
are
modified using
the
PARAMETER
SECTION,
all
parameter
data
for the resulting
tone enter this
area where
it remains
until another
tone is
created.
The tone
stored
in the
COMPARE/RECALL
area is
called when
the COMPARE/RECALL
key
in
the
PROGRAMMER SECTION
is
ON (indicator above the
key is
lit).
Indicator
lit
(Most recent
tone data called).
Changing
any parameter
data for
a tone
recalled
from
the
preset,
internal
or
cartridge
tones
causes the
COMPARE/RECALL
key to
automatically
switch ON
and the
data
for
the
tone
to
be stored
in
memory.
Switching
the
COMPARE/RECALL
key OFF
at this time
recalls the
data for the
original
(unmodified)
tone.
In
this way, the original
tone can
be compared
with
the
modified
tone
by switching
the
COMPARE/RECALL
key ON and
OFF.
-
Indicator
OFF
(Original
tone data recalled).
m
islerasediwhenltti^atal
todified
__,.^^,,^
i^he%ofe^ny^e 1^
IWRITEM>eiit^t^
^ithimmmm^i^^
m.^
SmH
-#.
g€l9aiPNEiDffnm/\miTE/S«i(E/ll(5|^
WRITE is
used
to store
newly
created
tone
data in the internal
bank
or
cartridge
area,
SAVE
is
used to
collectively
store
all
internal
bank tone
data to a
RAM
cartridge,
and LOAD is
used
to reload
data
to
the
internal
bank from
car-
tridge
or
tape.
MEMORY
PROTECT
FUNCTION
The function protects against
inadvertently
eras-
ing
valuable tone
data
from
memory.
LOAD from
external
memory sources and WRITE
operations
cannot
be
performed
when
the
PROTECT switch
on
the
back panel of the
CZ-1
is
ON.
•The PROTECT
switch should
only
be set
to the OFF
position during
WRITE
and
LOAD
operations.
Keep the switch in
the
ON
position for
normal
use and
SAVE
PROTECT
OFF
OH
t
operations.
Usually
left ON.
•WRITE
We
*'WRITE" altered or newly
created
tones when we
store
them
to
the internal
bank
or
a
cartridge. Data al-
tered in the Parameter
Section
are temporarily stored
after
alteration
in the
COMPARE/RECALL
area.
Notice
this
is
temporary.
Data
stored
in
the COMPARE/
RECALL area
will
be erased the
instant other
data
are
altered.
Therefore,
it
is
necessary
to WRITE
important tone data
from the COMPARE/RECALL
area to memory.
36

Casio CZ-1 Specifications

General

Brand	Casio
Model	CZ-1
Category	Synthesizer
Language	English