– 40 –
DT-X200/DT-X8
24. NFC Tag ID Read
50 mm
RFID
tag (85×54 mm)
Do not use a metal stand.
No. Operation Display Test Details
1
Place an RFID tag (85 x 54 mm)
with a distance of 50 mm from
DT-X200/DT-X8 and select “[3].
NFC Tag ID Read” from All Test
MENU-7 screen.
The NFC fi rmware version is
automatically checked and, when
the result is OK, DT-X200/DT-X8
starts to access to the tag.
Access:
UID Read → Data Write →
Data Read → Data Compare
If OK:
The test automatically ends and
the screen returns to the Menu
screen.
2
Firmware version error
If any problem:
The screen shown on the left is
displayed.
Pressing the “CLR” key returns
you to the Menu screen.
Access error
To Next Page
Loading...
Need help?
General