31
Quick Start Basics
. To turn on the camera
Press [p] (Power).
This will turn on the camera, which is indicated when the
back lamp lights green, and enter the REC mode.
Entering the REC Mode and PLAY Mode
. To turn off the camera
Press [p] (Power).
NOTE
• To conserve battery power, an Auto Power Off
function will turn off power automatically if you do not
perform any operation for about five minutes.
Turning Power On and Off
To enter the
PLAY mode
In the REC mode, touch “ ” (PLAY).
• If “ ” (PLAY) is not displayed on
the screen, you can touching the
Review image (page 67), or switch
to the PLAY mode by touching
“ ” (Show Icons) and then
touching “ ” (PLAY).
To enter the
REC mode
In the PLAY mode, touch “ ”
(Show Icons). On the screen image
that appears, touch “ ” (REC).
“”
(Show Icons)
Screen after “ ”
(Show Icons) is touched
“ ” (PLAY) / “ ” (REC)
[p] (Power)
Back lamp
To Next Page
Loading...
Need help?
General
