To Next PageTo Next PageHow to fix Casio Exilim EX-M2 if power does not turn on?
If your Casio Digital Camera's power doesn't turn on, the most likely cause is a dead battery. You should charge the battery. If the battery still goes dead quickly after being charged, it probably needs to be replaced. You can purchase a separately available NP-20 rechargeable lithium ion battery.
Why does my Casio Exilim EX-M2 Digital Camera suddenly power down?
If your Casio Digital Camera suddenly powers down, it could be due to two reasons: either the Auto Power Off feature is activated, or the battery is dead. To solve this, turn the power back on, or charge the battery.
What to do if the monitor screen is off on Casio Digital Camera?
If your Casio Digital Camera's monitor screen is off, it could be due to a couple of reasons. First, check if “LCD-OFF” is selected for the “Indicators” setting on the REC tab. If so, change the “Indicators” setting to “LCD-ON”. Second, if USB communication is in progress, disconnect the USB cable after confirming that the computer is not accessing camera memory.
What to do if Casio Digital Camera image is not recorded when pressing the shutter button?
If the Casio Digital Camera does not record the image when you press the shutter release button, it could be due to several reasons: * The mode selector is set to "PLAY" or "AUDIO". Align the mode selector with "REC". * The flash unit is charging. Wait until the flash unit finishes charging. * The memory is full. Transfer files you want to keep to your computer and then delete files from camera memory, or use a different memory card.
Why does my Casio Exilim EX-M2 Digital Camera power down during self-timer countdown?
If the Casio Digital Camera powers down during self-timer countdown, the cause is likely a dead battery. Charge the battery to resolve this issue.
How to fix Casio Exilim EX-M2 if I cannot transfer files over USB?
If you cannot transfer files over a USB connection with your Casio Digital Camera, check these potential causes: 1. Ensure the camera is securely set on the USB cradle. 2. Verify that the USB cable is securely connected. 3. Make sure the USB driver is installed on your computer. 4. Confirm that the camera is turned on.
Why is the color of playback image different from the recording screen on Casio Exilim EX-M2 Digital Camera?
If the color of the playback image is different from the image on the monitor screen during recording on your Casio Digital Camera, it means sunlight or another light source is shining directly into the lens during recording. Position the camera so sunlight does not shine directly into the lens.
What to do if all buttons and switches are disabled on Casio Exilim EX-M2?
If all buttons and switches are disabled on your Casio Digital Camera, it is likely due to a circuit problem caused by electrostatic charge or impact while the camera was connected to another device. To resolve this, remove the battery from the camera, reinsert it, and then try again.
Why Casio Exilim EX-M2 Digital Camera images are not displayed?
If images are not displayed on your Casio Digital Camera, it's likely because a memory card with non-DCF images recorded with another camera is loaded. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
Why I cannot playback audio on Casio Digital Camera?
If you cannot playback audio, cannot hear audio, or cannot control the audio playback using the remote controller on your Casio Digital Camera, here are several things to check: 1. Ensure the mode selector is set to "AUDIO". 2. Make sure there is MP3 file data in memory and transferred to the camera’s AUDIO folder. 3. Verify that the stereo headphones are correctly connected to the headphones jack. 4. Adjust the volume to a higher level. 5. Charge the battery. 6. Unlock the remote controller buttons. 7. Check the files you are trying to play. 8. Check the PLAYLIST.TXT file to ensure it lists the MP3 files you want to play.
General| Brand | Casio |
|---|---|
| Model | Exilim EX-M2 |
| Category | Digital Camera |
| Language | English |
Protects files from deletion individually or all at once.
Procedure to protect all files in memory with a single operation.
Copying important files to the FAVORITE folder for easy tracking.
Guide to adjust the camera's date and time.
Procedure to delete all data from the camera's built-in memory.
Important safety and usage guidelines for memory cards.
Step-by-step guide for inserting a memory card into the camera.
Procedure for safely ejecting a memory card from the camera.
Instructions for formatting a memory card using the camera.
Advice on using only specific card types and handling potential issues.
Procedures for copying files between built-in memory and a memory card.
Steps to transfer all files from the camera's internal memory to a card.
Steps to transfer a file from a memory card back to internal memory.
Instructions for installing camera software from the bundled CD-ROM.
Guide to installing camera software on Windows systems.
Step-by-step guide for installing software from the CD-ROM.
Guide to installing camera software on Macintosh systems.
Procedure to install the Photo Loader application.
Guide to installing the USB driver on Macintosh systems.
How to transfer files by connecting the camera via USB cradle.
How to transfer images using a memory card and computer slots.
Instructions for copying MP3 files from a computer to the camera.
Detailed operations for the audio playback remote controller.
Safety warnings regarding listening volume and use while operating vehicles.
Lists common symptoms, causes, and actions for power and recording issues.
Lists common symptoms, causes, and actions for playback issues.
Lists common symptoms, causes, and actions for audio playback issues.
Lists common symptoms, causes, and actions for general camera issues.
Explains various error messages and their resolutions.
