To Next PageTo Next PageWhat to do if Casio Digital Camera powers down during self-timer countdown?
If your Casio Digital Camera powers down during the self-timer countdown, the battery is likely dead. Charge the battery.
What to do if my Casio EXILIM EX-Z70 Digital Camera suddenly powers down?
If your Casio Digital Camera suddenly powers down, it could be due to the Auto Power Off feature being activated. Try turning the power back on. Another possibility is that the battery is dead. In this case, charge the battery.
How to fix the Auto Focus on my Casio Digital Camera?
If the Auto Focus on your Casio Digital Camera isn't focusing properly, the lens might be dirty, so clean it. Also, ensure the subject is in the center of the focus frame when composing the image. If the subject is incompatible with Auto Focus, use manual focus. If you are moving the camera, turn on Anti Shake or mount the camera on a tripod.
How to fix auto focus on Casio Digital Camera?
If the auto focus on your Casio Digital Camera isn't working properly, try these steps: 1. Clean the lens. 2. Ensure the subject is centered in the focus frame. 3. If the subject isn't compatible with Auto Focus, use manual focus. 4. If you're moving the camera, turn on Anti Shake or use a tripod.
Why are recorded images not saved in memory on Casio Digital Camera?
Recorded images might not be saved on your Casio Digital Camera if: 1. The camera powers down before saving is complete. If the battery indicator shows low battery, charge the battery as soon as possible. 2. The memory card is removed before saving is complete. Do not remove the memory card until saving is finished.
How to fix Casio EXILIM EX-Z70 when display language setting screen appears?
If the display language setting screen appears when you turn on your Casio Digital Camera, it indicates that the camera’s display language, Home city, date style, date and time, and other settings have not been configured. Check the settings. It could also indicate a problem with the camera’s built-in memory management area. If so, perform the reset operation to initialize the camera’s setup.
Why is there digital noise in my Casio Digital Camera images?
Digital noise in your Casio Digital Camera images occurs because sensitivity is increased automatically for dark subjects, which increases the chance of digital noise. Use a light or some other means to illuminate the subject.
Why is the color of playback images different on my Casio EXILIM EX-Z70?
If the color of the playback image differs from the image on the monitor screen during recording on your Casio Digital Camera, it could be because sunlight or light from another source is shining directly into the lens during recording. Position the camera so sunlight does not shine directly into the lens.
Why are subjects too dark in seashore or ski area photos with my Casio Digital Camera?
When recording images on a seashore or at a ski area, subjects may appear too dark because sunlight reflected by water, sand, or snow can cause underexposure. To correct this, change the flash mode setting to flash on for daylight synchro flash. You can also increase the EV shift value.
Why is the monitor screen image out of focus on my Casio EXILIM EX-Z70?
If the monitor screen image is out of focus on your Casio Digital Camera, and you are using Manual Focus mode, focus the image. If you're shooting scenery or portraits, use Auto Focus instead of Macro mode. Conversely, for close-up shots, use Macro mode instead of Auto Focus or Infinity mode.
General| Brand | Casio |
|---|---|
| Model | EXILIM EX-Z70 |
| Category | Digital Camera |
| Language | English |
Check all items included with your camera. If something is missing, contact your dealer.
Instructions on how to charge the rechargeable lithium ion battery.
Basic steps to compose and capture an image with the camera.
Illustrations showing camera components, buttons, and switches.
Information about the camera's power source and battery.
How the camera automatically adjusts settings and stores images.
How to select and use different flash modes for optimal lighting.
Steps to view and scroll through recorded images.
How to prevent files from being accidentally deleted.
Steps to prepare a memory card for use by deleting all data.
How to set print options like copies and date stamping for individual images.
Steps for connecting and transferring images using Windows.
Solutions for common camera operational problems and error messages.
