To Next PageTo Next PageHow to fix Casio Digital Camera that does not turn on?
If your Casio digital camera isn't turning on, it could be due to a few reasons: * The battery may not be loaded correctly. Ensure it's properly inserted. * The battery might be dead. Charge the battery. If the battery quickly loses charge after being charged, it likely needs replacement. Purchase a CASIO NP-80 rechargeable lithium ion battery.
What to do if Casio EXILIM EX-ZS5 suddenly powers down?
If your Casio digital camera suddenly powers down, here are a few potential causes and solutions: * Auto Power Off may have activated. Simply turn the power back on. * The battery may be dead. Charge the battery. * The camera’s protection function may have activated due to high temperature. Turn off the camera and allow it to cool down before using it again.
Why image is not recorded when the shutter button is pressed on Casio Digital Camera?
An image might not be recorded for several reasons: * The camera may be in PLAY mode. If so, press the REC button to enter REC mode. * The flash might be charging; wait for it to finish. * The memory may be full. If so, transfer images to your computer, delete unnecessary images, or use a different memory card.
Why the flash does not fire on Casio EXILIM EX-ZS5 Digital Camera?
If the flash on your Casio digital camera isn't firing, it could be due to these reasons: * The flash mode might be set to Flash Off. Change to another mode. * The battery may be dead. Charge the battery. * A BEST SHOT scene that uses Flash Off might be selected. Change to a different flash mode or select a different BEST SHOT scene.
What to do if subject is too dark when shooting images in a seashore or ski area with Casio EXILIM EX-ZS5 Digital Camera?
If your images are too dark when shooting in a seashore or ski area with your Casio Digital Camera, it's likely due to sunlight reflected by water, sand, or snow causing underexposure. To correct this, change the flash mode setting to Flash On for daylight synchro flash, or adjust EV shift to the + side.
What to do if Casio EXILIM EX-ZS5 Digital Camera powers down during Self-timer countdown?
If your Casio Digital Camera powers down during the self-timer countdown, the battery may be dead. Charge the battery.
Why digital zoom (including HD zoom) does not work on Casio EXILIM EX-ZS5 Digital Camera?
If digital zoom (including HD zoom) isn't working on your Casio Digital Camera, it could be because time stamping is turned on. Turn off time stamping to enable digital zoom.
What to do if power will not turn off or nothing happens when a button is pressed on Casio EXILIM EX-ZS5?
To resolve this issue, remove the battery from the camera and then reload it.
What to do if Auto Focus does not focus properly on Casio EXILIM EX-ZS5 Digital Camera?
If the auto focus on your Casio Digital Camera isn't working well, consider the following: * Ensure the lens is clean. * Position the subject within the focus frame. * If the subject isn't compatible with auto focus, use manual focus. * Avoid moving the camera while shooting; use Anti Shake or a tripod. * Half-press the shutter button and allow time for the camera to focus before fully pressing it.
Why images cannot be transferred over a USB connection from Casio EXILIM EX-ZS5?
Images may not transfer via USB for these reasons: * The USB cable may not be securely connected. Check all connections. * The wrong USB communication protocol may be selected. Select the correct protocol for your device. * The camera may not be turned on. Turn it on. * Connecting via a USB hub may prevent computer recognition. Connect directly to the computer’s USB port.
General| Image Sensor | 1/2.3-inch CCD |
|---|---|
| Optical Zoom | 5x |
| Digital Zoom | 4x |
| Aperture Range | f/2.8 - f/6.5 |
| Storage Media | SD/SDHC/SDXC memory card |
| Effective Pixels | 14.1 MP |
| LCD Screen | 2.7-inch TFT LCD |
| ISO Sensitivity | ISO 80-1600 |
| Video Recording | 720p HD |
| Battery | Rechargeable lithium ion battery (NP-120) |
Explains characteristics of the liquid crystal panel and potential pixel behavior.
Advises shooting a test shot to ensure the camera records correctly before final capture.
Details how to turn display information on/off and configure settings for REC and PLAY modes.
Highlights key features like Face Detection, Anti Shake, and BEST SHOT for easier image recording.
Crucial step to load and charge the camera's battery before its initial operation.
Guides on supported memory cards, loading, and formatting new memory cards.
Explains pixels and how to select different image sizes for various uses like printing or email.
Details on selecting flash modes (Auto, Off, On, Red-eye Reduction) for different shooting conditions.
Step-by-step instructions for configuring movie quality and starting/stopping recording.
Introduces BEST SHOT as a feature that automatically sets up the camera for various scenes.
Explains how to select and use predefined scene settings for optimal photos.
Covers various recording settings including focus modes, shutter, and anti-shake features.
Options to specify snapshot image quality and adjust image brightness (EV Shift).
Guides on connecting the camera directly to a PictBridge printer for image printing.
How to use DPOF to select images and specify print options.
Instructions for connecting the camera to a computer to view, store, and manage image files.
Specific steps for connecting and transferring files using Macintosh computers.
Explains the process of formatting internal memory or a memory card, erasing all data.
Important safety guidelines and warnings for operating the camera safely and avoiding damage.
Provides solutions for common camera problems related to power, image recording, and focus.
Lists common camera error messages and their corresponding recommended actions.
