To Next PageTo Next PageHow to turn on Casio Digital Camera if it doesn't power on?
If your Casio Digital Camera doesn't turn on, it might be due to a few reasons. First, ensure the battery is correctly loaded. If that's not the issue, the battery might be dead. Try charging it. If the battery quickly loses its charge after being charged, it likely needs to be replaced. Consider purchasing a CASIO NP-60 rechargeable lithium-ion battery.
Why does my Casio Exilim EX-Z29 suddenly power down?
If your Casio Digital Camera suddenly powers down, here's what you can check: * Auto Power Off might be enabled, so turn the power back on. * The battery could be dead, so charge it. * The camera's protection function might have activated due to high temperature; turn it off and let it cool down before using it again.
How to fix auto focus on Casio Exilim EX-Z29?
If the auto focus on your Casio Digital Camera isn't focusing properly: * Clean the lens if it's dirty. * Ensure the subject is in the center of the focus frame. * If the subject isn't compatible with Auto Focus, try using manual focus. * If you're moving the camera while shooting, try using Anti Shake or a tripod.
Why is the monitor screen image out of focus on my Casio Digital Camera?
If the monitor screen image on your Casio Digital Camera is out of focus: * If you're using Manual Focus, focus the image. * If you're using Macro for scenery or portraits, switch to Auto Focus. * If you're trying to use Auto Focus or Infinity when shooting a close-up, use Macro mode.
What to do if my Casio Exilim EX-Z29 doesn't record images?
If your Casio Digital Camera isn't recording images when you press the shutter button: * Ensure you're in REC mode by pressing the REC button if the camera is in PLAY mode. * Wait for the flash to finish charging. * If a “Memory Full” message appears, transfer images to your computer, delete unnecessary images, or use a different memory card.
Why doesn't the flash fire on my Casio Digital Camera?
If the flash on your Casio Digital Camera isn't firing: * Check if the flash mode is set to Flash Off. If it is, change to another mode. * Ensure the battery isn't dead; charge it if necessary. * If you're using a BEST SHOT scene that uses Flash Off, switch to a different flash mode or BEST SHOT scene.
Why is there digital noise in images from Casio Exilim EX-Z29?
If you're noticing digital noise in the images from your Casio Digital Camera: * The camera's sensitivity might be increased automatically in dark conditions, increasing noise. Try using a light to illuminate the subject. * Shooting in a dark location with Flash Off selected can also cause noise. Turn on the flash or use lights for better illumination.
What to do if images cannot be transferred from Casio Exilim EX-Z29 over USB?
If you're having trouble transferring images from your Casio Digital Camera via USB: * Check that the USB cable is securely connected. * Ensure the correct USB communication protocol is selected for your device. * Make sure the camera is turned on. * Connect the camera directly to your computer's USB port instead of using a USB hub.
What to do if Casio Exilim EX-Z29 won't turn off?
What to do if your Casio Digital Camera won't turn off, and no buttons respond? Remove the battery from the camera and then reload it.
Why does my Casio Exilim EX-Z29 Digital Camera power down during self-timer countdown?
If your Casio Digital Camera powers down during the self-timer countdown, the battery may be dead. Charge the battery.
General| Megapixel | 10.1 MP |
|---|---|
| Camera type | Compact camera |
| Sensor type | CCD |
| Image stabilizer | Yes |
| Image sensor size | 1/2.5 \ |
| Maximum image resolution | 3648 x 2736 pixels |
| Digital zoom | 4 x |
| Optical zoom | 3 x |
| Combined zoom | 12 x |
| Focal length range | 6.2 - 18.6 mm |
| Lens structure (elements/groups) | 6/5 |
| Interface | USB 2.0 |
| Digital SLR | No |
| Camera shutter speed | 1/2 - 1/2000 s |
| Focal length (35mm film equivalent) | 37.5 - 112.5 mm |
| Auto focusing (AF) modes | continuous auto focus, multi point auto focus, spot auto focus |
| Manual focusing range (wide) | ∞ m |
| Light metering | Centre-weighted, Spot |
| ISO sensitivity | 100 |
| Light exposure modes | Auto |
| Motion JPEG frame rate | 30 fps |
| Video formats supported | Avi, M-JPEG |
| Maximum video resolution | 848 x 480 pixels |
| Audio system | Mono |
| Display diagonal | 2.7 \ |
| Display resolution (numeric) | 479 pixels |
| I/O ports | A/V |
| USB version | 2.0 |
| White balance | auto, Cloudy, daylight, Fluorescent, manual, Tungsten |
| Camera playback | movie, single image, slide show |
| Self-timer delay | 2 s |
| Playback zoom (max) | 8 x |
| Product color | Black |
| Battery type | NP-60 |
| Number of batteries supported | 1 |
| Flash modes | auto, Flash off, Red-eye reduction |
| Flash range (tele) | 0.4 - 1.5 m |
| Flash range (wide) | 0.15 - 2.8 m |
| Flash recharging time | 6 s |
| Internal memory | 17.8 MB |
| Compatible memory cards | sd |
| Camera shutter type | electronic, mechanical |
Weight and Dimensions| Width | 0 mm |
|---|---|
| Weight | 125 g |
Explains the pixel yield of the monitor screen and its implications for image display.
Provides advice to shoot a test image to ensure correct camera recording.
Explains the fundamental operation of digital cameras and image storage.
Explains the feature that automatically detects faces for portraits.
Explains the feature that minimizes image blur from camera or subject movement.
Introduces scene modes for automatic camera setup for perfect images.
Lists the types of memory cards compatible with the camera.
Step-by-step instructions for inserting a memory card into the camera.
Procedure for powering on the camera using the ON/OFF button.
Procedure for powering off the camera using the ON/OFF button.
Addresses issues when the focus frame stays red and the back lamp flashes.
Explains using 'Focus lock' when the subject is not in the center focus frame.
Steps to delete one image file from the camera's memory.
Steps to delete all image files from the camera's memory.
Lists conditions that can make proper autofocus impossible.
Explanation of what pixels are and their role in image detail.
Explains how image size relates to pixel count and detail.
Sets the camera's sensitivity to light for better exposure in different conditions.
Adjusts color balance to match light sources for accurate colors.
Allows selection of date display format (e.g., MM/DD/YY).
Instructions on using optical and digital zoom for framing subjects.
Step-by-step instructions for recording video clips with audio.
Explains BEST SHOT as a collection of scene modes for automatic camera setup.
Displays examples of different BEST SHOT scenes like Portrait, Scenery, Night Scene.
Instructions on how to select and use a BEST SHOT scene for shooting.
Instructions for activating and using the face detection feature.
Instructions on enabling and using Anti-Shake to reduce image blur.
Allows selection of focus area (Spot or Multi) for autofocus.
Guides users through simplified snapshot recording using the Easy Mode.
Allows assigning functions to the directional keys for quick access.
Enables an on-screen grid for easier image composition and alignment.
Allows turning digital zoom on or off to control zoom behavior.
Configures whether an image is displayed briefly after shooting.
Enables textual descriptions for icons displayed on the screen.
Allows selection of image resolution for snapshots.
Sets the image quality priority for snapshots (Fine, Normal, Economy).
Sets the detail, smoothness, and clarity for movie recordings.
Allows manual adjustment of image exposure value (EV) before shooting.
Adjusts color balance to match light sources for accurate colors.
Sets the camera's sensitivity to light for better exposure in different conditions.
Determines which part of the subject is metered for exposure.
Applies color effects to images during shooting.
Adjusts the level of detail and edge definition in images.
Adjusts the intensity of colors in the image.
Modifies the difference between light and dark areas in the image.
Adjusts the power output of the camera's flash.
Instructions for viewing still images on the camera's monitor.
Instructions for playing back recorded movie files on the camera.
Guides on how to magnify and navigate images displayed on the screen.
Enables a multi-image display for quick browsing.
Instructions for setting up and viewing an automatic slideshow of images.
Prepares images for printing by specifying print options via DPOF.
Guides on how to protect specific files or all files from accidental deletion.
Allows rotating images by 90-degree increments for proper orientation.
Enables reducing the size of a snapshot and saving it as a new file.
Allows trimming unwanted parts of an image and saving the result.
Enables recording and adding audio commentary to still images.
Steps to configure camera settings for connecting to a printer.
Instructions for physically connecting the camera to a printer via USB.
Explains DPOF for specifying print options like image type and number of copies.
Lists operations: saving images, transferring files, playback/editing movies.
Procedure to connect camera via USB and set 'Mass Storage' mode.
Guides on how to play movie files using media players.
Instructions for installing the software for uploading videos to YouTube.
Instructions for installing the Photo Transport software for file transfer.
Steps to transfer images from computer to camera using Photo Transport.
Using iPhoto for managing images on Macintosh.
Guides on how to play movie files using QuickTime on Macintosh.
Details on file naming conventions and maximum file counts.
Details on folder naming conventions and maximum folder counts.
Explains the Design Rule for Camera File System (DCF) standard.
Illustrates the hierarchical structure of folders and files on the memory card.
Lists image file types compatible with the camera.
Provides precautions for handling built-in memory and memory cards.
Configures camera to stamp recording date or date and time on snapshots.
Instructions for adjusting the camera's internal clock and date.
Allows selection of date display format (e.g., MM/DD/YY).
Sets the language for the camera's menus and display.
Turns off the monitor screen after a period of inactivity.
Turns off the camera automatically after a period of inactivity.
Sets how the REC and PLAY buttons control camera power.
Selects the USB communication protocol for device connections.
Instructions for formatting built-in memory or a memory card.
Restores camera settings to their original factory default state.
Utilizes the histogram display to check and adjust image exposure levels.
Warns against using the camera while operating vehicles or walking.
Advises against looking at the sun through the viewfinder.
Safety precautions related to using the camera's flash unit.
Precautions regarding handling and potential damage to the monitor screen.
Warning against using non-specified devices with camera connectors.
Precautions for operating the camera in restricted environments like aircraft.
Immediate actions for smoke, odor, or overheating to prevent shock/fire.
Precautions and actions for exposure to liquids or foreign matter.
Immediate actions for damage from dropping or rough handling.
Warning against exposing the camera to fire.
Discourages disassembly or modification, recommending authorized service.
Lists locations to avoid due to humidity, dust, heat, or vibration.
Emphasizes the importance of backing up camera data to other devices.
Guidance on correct battery replacement to prevent data corruption.
Details safe usage, charging, and handling of the rechargeable battery.
Covers battery leakage, fluid exposure, and charging issues.
Provides approximate battery operating times under normal conditions.
Lists actions that can risk data corruption in camera memory.
Specifies recommended operating temperature and humidity ranges.
Provides steps to prevent condensation after temperature changes.
Guidance on cleaning the lens and understanding potential image distortion.
Tips on cleaning the lens, flash window, and camera body.
Specific precautions for handling older rechargeable batteries.
Safety guidelines for using the battery charger unit and its cord.
Notes that slight camera warmth during use is normal.
Outlines restrictions on unauthorized use of images and copyrighted material.
Troubleshooting for the [CHARGE] lamp not lighting or flashing red.
Step-by-step instructions for removing and installing a battery.
Covers battery leakage, fluid exposure, and charging issues.
Guidance on storing batteries to maintain their characteristics and prevent over-discharge.
Information on charger voltage compatibility and power supply requirements abroad.
Recommendation to carry spare batteries for extended trips.
Instructions for removing and inserting a memory card.
Tips on write protection, abnormal behavior, and reformatting.
Information on memory card performance, especially for high-quality movies.
Guidance on data security when disposing of or transferring ownership.
Lists default settings for REC mode menus after a camera reset.
Lists default settings for Quality menus after a camera reset.
Addresses problems like camera not turning on or powering down unexpectedly.
Troubleshoots problems like images not recording or autofocus failing.
Table showing snapshot capacity based on image size and quality.
Details recording capacity for movies based on quality settings.
Provides capacity estimates for voice recordings.
Details voltage, capacitance, dimensions, and weight of the battery.
Details input power, output power, operating temperature, and dimensions of the charger.
