INTRODUCTION
16
â– Caring for your camera
• Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
• Fingerprints, dirt, and other foreign matter on the flash
can interfere with proper operation of the camera. Avoid
touching the flash. If the flash becomes dirty, wipe it clean
with a soft, dry cloth.
• If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
â– Monitor Screen Images
• The images that normally appear on the monitor screen
during image playback are smaller than normal, and so
you cannot see all of the detail of the actual image. Your
camera has an image zoom feature (page 126) which you
can use to enlarge the monitor screen image. You can
use this feature for on-the-spot checks of important
images.
â– Other
• The camera may become slightly warm during use. This
does not indicate malfunction.
B
To Next Page
Loading...
Need help?
General
