OTHER RECORDING FUNCTIONS
99
4.
Use [왗] and [왘] to select the candidate you
want to correct.
5.
Use [왖] and [왔] to
select “Correct”, and
then press [SET].
• Selecting “Cancel” in
place of “Correct” stores
the original image as-is,
without correcting it.
IMPORTANT!
• Digital zoom is disabled while recording with
Business Shot. However, you can use optical zoom.
• The camera will not be able to recognize the subject
in the following cases.
— When part of the subject extends outside of the
monitor screen
— When the subject is the same color as the
background it is placed upon
• The maximum Business Shot image size is 2M (1600
×
1200 pixels), even if the camera is configured for a
larger image size. An image size setting smaller than
2M (1600
×
1200 pixels) records images at the
specified size.
Restoring an Old Photograph
You can use the procedure in this section to restore an old,
faded photograph with the color provided by modern digital
camera technology.
Before trying to restore an old
photograph
• Make sure the entire photograph you are trying to restore
is enclosed within the monitor screen.
• Make sure the object is against a background that allows
its outline to stand out, and that it fills the monitor screen
to the maximum extent possible.
• Make sure that light is not reflecting off the surface of the
original photograph.
• If the old photograph is portrait orientation, be sure to
compose the image with the camera in landscape
(horizontal) orientation.
To Next Page
Loading...
Need help?
General
