APPENDIX
238
Using the Photo Stand Feature
The “Photo Stand” feature lets you specify what should
appear on the camera’s monitor screen while the camera is
on its USB cradle. You can play a Photo Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. Before using Photo Stand feature, you need to
configure slideshow settings as described in the camera
user’s guide.
1.
Turn off the camera.
2.
Set the camera onto the USB cradle.
3.
Press the USB
cradle’s [PHOTO]
button.
• This starts the Photo
Stand slideshow with
the images or image
you specified.
• Pressing [MENU] displays a screen for configuring
slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or
select “Start” and then press [SET].
• During audio playback, you can adjust volume by
pressing [왔] and then using [왖] and [왔].
4.
To stop the Phot Stand slideshow, press the
[PHOTO] button again.
IMPORTANT!
• The battery is not charged while a Photo Stand
slideshow is in progress. To charge the battery, stop
the slideshow.
[PHOTO] button
To Next Page
Loading...
Need help?
General
