GETTING READY
42
■ To turn off the camera
Press the power button to turn off the camera.
NOTE
• You can setup the camera so it does not turn on
when you press [ ] (REC) or [ ] (PLAY), or to
turn off when you press [ ] (REC) or [ ] (PLAY).
For details, see “Configuring [ ] (REC) and [ ]
(PLAY) Power On/Off Functions” on page 169.
Configuring Power Saving Settings
You can configure the settings described below to
conserve battery power.
Sleep : Automatically turns off the monitor
screen if no operation is performed for a
specified amount of time in the REC
mode. Performing any button operation
causes the monitor screen to turn back
on.
Auto Power Off : Turns off power if you do not perform
any operation for a specified amount of
time.
1.
Turn on the camera.
2.
Press [MENU].
3.
Use [왗] and [왘] to select the “Set Up” tab.
4.
Use [왖] and [왔] to select the feature whose
setting you want to configure, and then press
[왘].
To Next Page
Loading...
Need help?
General
