E-68
• Use fc to select 2 “
I”, input 25, and then press
E.
Note that you need to input 2 “
I” only when you are
using the fixed percent (FP) or declining balance (DB)
method.
•Use fc to select 3 “PV”, input 150000, and then
press E.
•Use fc to select 4 “FV”, input 0, and then press
E.
•Use fc to select 5 “
j ”, input 3, and then press
E.
•Use fc to select 6 “YR1”, input 2, and then press
E.
2. Select the value you want to calculate.
• For this example, use
fc to select
“SL:Solve”.
3. Press l to perform the
calculation.
•Pressing the E key returns to the value input screen.
A Other DEPR Mode Calculations
Example 2: To use the fixed percent method with a
depreciation ratio is 25%
•In step 2 of the basic procedure (Example 1), select “FP:
Solve”.
Example 3: To use the sum-of-the-year’s digits method
• In step 2 of basic procedure (Example 1), select
“SYD:Solve”.
Example 4: To use the double declining balance method
1. In step 1 of the basic procedure (Example 1), input 200
for “
I”.
2. In step 2, select “DB:Solve”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
