Casio FC-100V User Manual

E-89
A Basic DCL Sub-mode Procedure
Example 1: To calculate the degree of combined leverage
(DCL)
1. Input the required values from the Setting Values table
(page E-88).
• For this example, use
fc to select 1 “SAL”,
input 1200000, and then
press E.
•Use fc to select 2 “VC”, input 600000, and then
press E.
•Use fc to select 3 “FC”, input 200000, and then
press E.
•Use fc to select 4 “ITR”, input 100000, and then
press E.
2. Select the value you want to calculate.
• For this example, use
fc to select 5 “DCL”.
3. Press l to perform the
calculation.
A Other DCL Sub-mode Calculations
Example 2: To calculate the sales amount (SAL), variable
cost (VC), fixed cost (FC), and interest (ITR)
•Use the basic procedure (Example 1), substituting the
required values.
A DCL Sub-mode Financial Calculation
Variables (VARS)
•Variables SAL, VC, FC, ITR, and DCL are used in the
DCL sub-mode.
• DCL sub-mode variable contents are cleared whenever
you change to another mode other than the BEVN Mode
sub-modes (BEV, MOS, DOL, DFL, DCL, QTY CONV.).

Casio FC-100V Specifications

General

Type	Financial
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Gray
Housing material	Plastic
Digits	10 digits
Display type	Dot-matrix
Display tilting	No
Display size (HxV)	31 x 96 mm
Display number of lines	4 lines
Display number of characters	15
Storage media type	Flash
Battery type	AAA
Power source	Battery
Battery life (max)	17000 h
Number of batteries supported	1
Operation	log, ln, 10x, ex, x2/ ^ / x√ , √, x-1, x!, nPr - nCr
Symbolic notation	Fraction, Square root
Conversion between	Decimal, Percent
Package type	Box
Package depth	245 mm
Package width	155 mm
Package height	43.1 mm
Package weight	368.7 g

Weight and Dimensions

Depth	161 mm
Width	80 mm
Height	13.7 mm
Weight	110 g