– 22 –
1(Eng ON): Engineering symbols on (indicated by
“Eng” on the display)
2(Eng OFF): Engineering symbols off (no “Eng”
indicator)
• The following are the nine symbols that can be used
when engineering symbols are turned on.
To input this symbol:
Perform this key operation: Unit
k (kilo)
A k 10
3
M (Mega) A M 10
6
G (Giga) A g 10
9
T (Tera) A t 10
12
m (milli) A m 10
–3
µ (micro) A N 10
–6
n (nano) A n 10
–9
p (pico) A p 10
–12
f (femto) A f 10
–15
• For displayed values, the calculator selects the engineer-
ing symbol that makes the numeric part of the value fall
within the range of 1 to 1000.
• Engineering symbols cannot be used when inputting frac-
tions.
• Example: 9 10 = 0.9 m (milli)
F
.....
1
(Disp)
1
0.
Eng
9 \ 10 =
900.
9
⫼1 m
When engineering symbols are turned on, even standard (non-engineering)
calculation results are displayed using engineering symbols.
A P
0.9
J
900.
9
⫼1 m