Casio FX-795P

CHAPTER 7 Command Reference
SAVEH
(harun
@
Character string
Function:
Stores memo data in the DATA BANK on a cassette tape.
Parameter:
File name: 1 < character numbers of character string < 8.
Can be omitted.
Explanation:
1) Stores all memo data in the DATA BANK on a cassette tape.
2) Since memo data‘ cannot-be stored with SAVE or SAVE ALL, always load
memo data with SAVE#.
3) If a password has been specified, storing is performed with this password.
Therefore, the same password must be specified when the loading is per-
formed by the LOAD# command.
4) Cannot be executed in the MEMO IN mode.
Example:
SAVE #4)
SAVE #*CAS 10’
202
7-7. DATA BANK Commands
LOAD# | Simacersting 8
Function:
Loads memo data in the DATA BANK from a cassette tape.
Parameter: .
File name: 1 < character numbers of character string < 8.,Can be
omitted.
M: (f M is specified, additional memo data can be
loaded.)
Explanation:
1) In the case of LOAD# [File name”]
_ a) Loads memo data in the DATA BANK from a cassette tape after erasing
all memo data currently stored in the DATA BANK.
b) Loads first memo. data found ona cassette tape being played back if the
file name is omitted.
c) This cannot be executed in the MEMO IN mode.
d) This cannot be executed in a program.
2) In the case of LOAD# [“File name”] ,M
a) Loads additional memo data in the DATA BANK. from a cassette tape
following the memo data currently stored in the DATA BANK.
For b) to d), same as for LOAD#.
Example:
LOAD# be
LOAD#*CAS 106
iy f
203