• Your input exceeds the allowable input range (particularly when using
functions).
• The calculation you are performing contains an illegal mathematical
operation (such as division by zero).
Action:
• Check the input values, reduce the number of digits, and try again.
• When using independent memory or a variable as the argument of a
function, make sure that the memory or variable value is within the
allowable range for the function.
Stack ERROR
Cause:
• The calculation you are performing has caused the capacity of the
numeric stack or the command stack to be exceeded.
Action:
• Simplify the calculation expression so it does not exceed the capacity
of the stack.
• Try splitting the calculation into two or more parts.
Syntax ERROR
Cause:
• There is a problem with the format of the calculation you are
performing.
Action:
•
Make necessary corrections.
Argument ERROR
Cause:
• There is a problem with the argument of the calculation you are
performing.
Action:
• Make necessary corrections.
Before Assuming Malfunction of the
Calculator...
Perform the following steps whenever an error occurs during a calculation
or when calculation results are not what you expected. If one step does
not correct the problem, move on to the next step.
46
To Next Page
Loading...
Need help?
General
