2. Press y(RESET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select e(Add-In) to disable Add-In Applications.
Select r(STRGMEM) to delete storage memory
data.
Select
y(A&S) to disable Add-In Applications
and delete storage memory data.
To Restore Add-in Applications, Programs and List and Spreadsheet Data:
1. Using an I/O unit-to-unit cable (which comes with the PRIZM/fx-CG10
models), connect together the two graphing calculators- at least one of the
two units must be “temporarily disabled”.
2. On both calculators, from the Main Menu, highlight
the LINK icon and press
l or press j.
3. Press
r(CABLE) to select the type of cable.
4. Select
w(3PIN) as the cable type.
To Next Page
Loading...
