20050401
7-2-2
Simple Interest
Use the following function menus to maneuver between calculation result screens.
•{REPT} … {parameter input screen}
•{GRPH} … {draws graph}
After drawing a graph, you can press !1(TRCE) to turn on trace and read calculation
results along the graph.
Each press of e while trace is turned on cycles the displayed value in the sequence:
present value (PV) → simple interest (SI) → simple future value (SFV). Pressing d cycles
in the reverse direction.
Press J to return to the parameter input screen.
To Next Page
Loading...
