20050401
9-5 S
•
SHT Mode Commands
This section explains how to use the S
•
SHT mode commands.
u To input a S
•
SHT mode command
1. Select the cells where you want to input the formula that contains the S
•
SHT mode
command.
2. Press 2 (EDIT)3(CELL) or !.(=) to enter the edit mode.
• 2(EDIT)3(CELL) can be used if the selected cell already contains data.
3. Press the function menu key for the command you want to input.
To input this command: Press this key: For details:
CellIf( (Condition) 4(If) Page 9-5-2
CellMin( (Minimum of Cells) 5(CEL)1(Min) Page 9-5-2
CellMax( (Maximum of Cells) 5(CEL)2(Max) Page 9-5-3
CellMean( (Mean of Cells) 5(CEL)3(Mean) Page 9-5-3
CellMedian( (Median of Cells) 5(CEL)4(Med) Page 9-5-3
CellSum( (Sum of Cells) 5(CEL)5(Sum) Page 9-5-4
CellProd( (Product of Cells) 5(CEL)6(Prod) Page 9-5-4
4. Input the other parameters.
•The additional parameters you need to input depend on the command you are using.
For details, see “S
•
SHT Mode Command Reference” on page 9-5-2.
9-5-1
S
•
SHT Mode Commands
To Next Page
Loading...
Need help?
General
